Speedway Straight Panhard Bar Track Rod
26.50" Overall Length, 1" Tube O.D.
- Straight steel panhard bar, 26-1/2" eye-to-eye
- Big 3/4" heims
- This kit includes: Steel Sleeve for 3/4" heims, 3/4" LH male standard heim, 3/4" RH male standard heim, 3/4" LH raw jam nut, 3/4" RH raw jam nut
- If your application requires the use of misalignment spacers then 910-07000 would be the best one for you
- This fine piece can be used on a plethora of applications
Build Your KitYou're almost there! This kit has an option or two for you to select. Let us know which options you want for your new kit.
Straight steel panhard bar, 26-1/2" eye-to-eye. With 3/4" heims.
Note: When using these bars, your specific application my require the use of heim spacers for maximum range of motion. Spacing out the mounting tabs prevents the heim joint body from making contact with the them. This provides for greater misalignment (range of motion) without decreasing hole size.
If your application requires the use of misalignment spacers then 910-07000 would be the best one for you. It is 1/2” thick and when you use one on each side of the heim they will add a total of 1” of thickness. 910-07001 could also be used if you need to space out further from your mounting point as it is 1” thick.
This kit includes:
- Steel Sleeve for 3/4" heims
- 3/4" LH male standard heim
- 3/4" RH male standard heim
- 3/4" LH raw jam nut
- 3/4" RH raw jam nut
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
What's In The Kit
Steel Sleeve for 3/4 HeimsPart # 91034134-23-STLQty x 1
Standard Steel Heim Joint Rod Ends, 3/4-16 LH MalePart # 1750307Qty x 1
Standard Steel Heim Joint Rod Ends, 3/4-16 RH MalePart # 1750107Qty x 1
Thin Steel Jam Nuts, 3/4-16 RHPart # 1750247Qty x 1
Thin Steel Jam Nut, 3/4-16 LHPart # 1750447Qty x 1
Q & A
Check out our 6th episode of the 410 Sprint Car Build series. Last time we assembled the rear axle and now we are installing it!
Do you need a Panhard Bar on your front suspension? Find out whether its recommended to have one on your four-bar or cross steering system.
When it comes to a traditional style build on an early hot rod it just has to be rolling on a solid front axle of some sort. In this buyer's guide we take you through I-beam and round tube solid axles, spindle choices, radius rod needs, and more.
Jacobs Ladder Layout for a Sprint Car.
This article demonstrates how to install a complete Winters quick change kit with additional parts including birdcages, brackets, and calipers for a modified race car.
Follow this guide on how to install a splined sway bar for GM A-body applications. See the installation process on a '68 Chevelle frame using stock control arms and factory chassis bolt and pad locations.
Here's a handy guide to familiarize you with our G-Comp line of performance suspension systems.