|
#91634037
Speedway Steel Lower A-Arm Bushing, 1.650 O.D. x .563 I.D.
- These steel lower control arm bushings are virtually "bulletproof"
- Minimize alignment change during cornering since they do not deflect
- Bushings are sold each and include a grease zerk fitting for lubrication
$22.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
- These steel lower control arm bushings are virtually "bulletproof"
- Minimize alignment change during cornering since they do not deflect
- Bushings are sold each and include a grease zerk fitting for lubrication
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91634037 Details
Speedway Motors 91634037 Details
These steel lower control arm bushings are virtually "bulletproof". They will minimize alignment change during cornering since they do not deflect. Bushings are sold each and include a grease zerk fitting for lubrication.
Charts
Guides & Documents
Speedway Motors 91634037 Specifications
Speedway Motors 91634037 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91634037 |
| Brand | Speedway Motors |
Ratings & Reviews
4.8
5 Reviews
Customers are highly satisfied with our product due to its easy installation, perfect fit, and high quality. They value the precise tolerances between the product's surfaces that ensure a perfect fit. The product has been praised for its affordable price, despite its high quality. Minor caution is advised during installation to prevent binding, but once installed correctly, performance remains high. The quality far outweighs the minimal concern. With careful use, customers found our product to be worth repurchasing.
Ratings & Reviews
4.8
5 Reviews
Customers are highly satisfied with our product due to its easy installation, perfect fit, and high quality. They value the precise tolerances between the product's surfaces that ensure a perfect fit. The product has been praised for its affordable price, despite its high quality. Minor caution is advised during installation to prevent binding, but once installed correctly, performance remains high. The quality far outweighs the minimal concern. With careful use, customers found our product to be worth repurchasing.
4.8
5 reviews
5
4
4
1
3
0
2
0
1
0
Filter by Ratings
Product fit like it should.
5.0
2 years ago
Gerraldfarms
South Carolina
Verified
Good product at a good price.
Would Recommend
I would purchase again
5.0
7 years ago
GBR#13
Michigan
Verified
Easy install with no issues
Would Recommend
Great Product
5.0
8 years ago
Amac
Arkansas
Verified
Easy to install
Would Recommend
Good Tolerence Between Surfaces
4.0
11 years ago
SuperDuke
Tennessee
Verified
The tolerance between the inner and outer is very close which is good. The fit into my control arm was perfect. I used a brass drift and hammer to install then spot welded. I suggest being very careful not to swell the edges because it will bind and have to be sanded if you do. 4 stars due to press in alemite instead of threaded. they work fine but can be ruined if hammered in hitting the tip.
Would Recommend
Affordable
5.0
15 years ago
t39racer
Signal Mountain TN
Verified
High quality at a great price
Would Recommend
Showing 5 of 5 reviews
Questions & Answers
Questions & Answers
1 Question • 1 Answer
will these fit into a metric impala a arm for my modified?
by foux6
• 10 years ago
1 answer
View Answer
1 of 1 questions shown