|
#91089430
$18.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
2.78" Overall Height, 6.63" Overall Length, Steel
| Overall Height | 2.78" |
| Overall Length | 6.63" |
| Overall Width | 6.19" |
| Material Thickness | 0.25" |
| Hardware Included | No |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThe Speedway Standard Engine Lift Plate is the reliable way to lift and install engines using a carburetor-style intake manifold. Precision-drilled to fit both Holley and Rochester 2- and 4-barrel bolt patterns, this lift plate bolts directly to your intake for a secure lifting point.
With four lifting holes you can fine-tune the balance point, making it easier to maneuver engines in tight engine bays. The 1/4-inch thick steel construction with full-length welds ensures the strength needed for heavy iron-block V8s as well as lighter aluminum engines. A gold zinc-plated finish protects against rust, making this a shop tool you’ll use for years.
Application: Standard Holley & Rochester 2-bbl and 4-bbl carb bolt patterns
Material: 1/4-inch steel
Width: 6-5/8 in.
Depth: 6-3/16 in.
Lift Holes: (4) x 1-3/8 in. diameter
Finish: Gold zinc plated
Capacity: Suitable for iron and aluminum block engines, caution is urged when lifting iron big blocks with aluminum intakes as threads may pull from intake
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91089430 |
| Brand | Speedway Motors |
| Overall Height | 2.78" |
| Overall Length | 6.63" |
| Overall Width | 6.19" |
| Material Thickness | 0.25" |
| Hardware Included | No |
| Material Type | Steel |
| Finish | Yellow Zinc |
| Carburetor Flange Type | Dual: Square and Spread Bore |
| GENERAL | |
| Sold in Quantity | Each |
| Notes | Please use caution if lifting iron big blocks with aluminum intakes. |
4.9
69 Reviews
Customers overwhelmingly find this engine lift plate to be a reliable, practical, and well-made tool. Its universal design, accommodating various engine types, is praised consistently. Users highlight its sturdiness and balance while lifting both small and large engines, demonstrating superior durability and safety. The quality of material and solid welding are repeatedly mentioned, indicating high quality of construction. Negative comments generally relate to minor usability issues, with most customers satisfied with its performance, labeling it as a must-have for engine removal and installation. Despite some alternatives on the market, the product's cost-effectiveness positions it as a top recommendation among customers.
4.9
69 reviews
5
65
4
3
3
1
2
0
1
0
Most Liked Positive Review
5.0
Best engine lift plate made!!
I borrowed a friend's engine lift plate, a very old, well made one, and decided to get one of my own. But most of the ones that I found were only partially welded, a few inch-long beads holding the handle to the plate instead of continuous beads running the full length. Luckily I found this one at Speedway Motors, I ordered it, but still held my breath as I opened the box. But sure enough it was fully welded just like I wanted it to be! It's great to receive something just as nice as expected. no disappointments here!
Most Liked Negative Review
3.0
It worked ,I had to drill new holes they said it would bolt
I used it to lift a 5.3 liter motor out of a 2016 and it worked great after i drilled new holes.
Filter by Ratings
Worked great
5.0
6 months ago
Al
Omaha
Verified
Puled the engine right out, no problems
Would Recommend
Excellent engine lift
5.0
7 months ago
Rich
NC
Verified
Used this to pull a Mopar 318 with a two barrel intake - worked great. I did buy grade 8 bolts to go into the intake for safety. Holes in the base lined up great, the holes in the vertical were plenty big enough for the chain and hooks to go through and secure. Worth the cost.
Would Recommend
Solid lift plate
5.0
a year ago
Sea
Phoenix AZ
Verified
This has a solid weld where all others I found were spot welded
Would Recommend
Solid welds
5.0
a year ago
Newbie
Scottsdale, AZ
Verified
Solid weld vs spot weld on others
Would Recommend
Part fit perfectly and I would recommend
5.0
a year ago
Sparky
Apache Junction, Az
Verified
This worked great. Fit perfectly and the build quality looks fantastic.
Would Recommend
Very handy and efficient
5.0
a year ago
Shade tree wannabe
Tampa, Florida
Verified
Not advisable on composite intakes, but works great on aluminum and cast iron
Would Recommend
Great price good quality
5.0
a year ago
Buddy
Salt lake city Utah
Verified
Heavy duty
Would Recommend
I'll be back for more
5.0
a year ago
FordMan
Pensylvania
Verified
Very well built and arrived fast
Would Recommend
Happy with buying this product.
5.0
a year ago
Bob
Rimrock,Arizona
Verified
Great for lifting and moving engine around.
Would Recommend
Works
5.0
a year ago
Wef
Texas hill country
Verified
Fits perfectly
Would Recommend
Showing 10 of 69 reviews
1 Question • 1 Answer
Was wondering if anyone hold an idea weight limitations on this plate?
by Chris
• 10 years ago
1 answer
View Answer
1 of 1 questions shown
