|
#5501285
$14.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Oval Track Cars, 5.50" Outside Diameter, Rubber
Need help?
855.313.9176Quick and Easy Returns
Return PolicyRubber coil spring spacer for increasing spring load. A quick way to increase spring rate for fast or rough tracks. Works with 5" and 5.5" O.D. coil springs.
Spacer is 7/8" thick and 1" wide.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 5501285 |
| Brand | Speedway Motors |
| GENERAL | |
| Outside Diameter | 5.50" |
| Inside Diameter | 4.00" |
| Overall Length | 1.75" |
| Sold in Quantity | Each |
| Material Type | Rubber |
4.9
48 Reviews
Customers praise the product for its quality and capability of significantly enhancing the performance of their vehicles. It's cited as being easy to install, with several customers recommending using lubrication or soap suds for effortless fitting. This product is recognized to provide excellent suspension support, thereby aiding in improving speed and handling, particularly during track racing. Many emphasize its useful feature of easily increasing spring rates on the go, and express satisfaction with the noticeable ride height adjustment. Customers commend these spring rubbers for their noticeable contribution to vehicle stability, even under challenging conditions. The product is perceived as a valuable, cost-effective tool for achieving better cornering and reducing lap times, with one customer noting a 6-second decrease in lap time. Positive comparisons have been made to higher-priced alternatives, with this product matching the efficacy but at a fraction of the cost. Users confirm that this product delivers as promised, offering a practical solution for improving ride quality and performance.
4.9
48 reviews
5
44
4
4
3
0
2
0
1
0
Filter by Ratings
Yes. I ordered 2 more
5.0
7 months ago
Ricky racer
Lost wages nv.
Verified
It's a great product
Would Recommend
Work good
5.0
2 years ago
Limmer guy
Maine
Verified
I recommend soap or wd40 to install and bending them over backward seemed to help.
Would Recommend
Works great
5.0
2 years ago
Red47
St. George UT
Verified
Use them on my mini stock. Fits in the struts perfectly.
Would Recommend
Works good
5.0
2 years ago
Hall
Guin al
Verified
Works good to increase spring pressure some without having to change spring
Would Recommend
Helped me solve a problem in a low cost manner
4.0
2 years ago
J.
Carson, IA
Verified
I had some Western Chassis 1" (more like 1.5") drop springs on my C10 and they were just a little too soft even with good shocks and less unsprung weight. I found that putting these in place went a long way to firm up the front just enough to improve handling without impacting ride comfort.
Would Recommend
Great product at great price!
5.0
2 years ago
Rod
Southern KY
Great product fits well and does what it's supposed to do!
Would Recommend
Good quality!
5.0
2 years ago
Rod
Southern KY
Verified
Haven't used the product yet but seems well made!
Would Recommend
Quality product that did it's job.
5.0
2 years ago
KP16
Cincinnati, OH
Verified
Product worked great and provided support in crown Victoria suspension needed for circle track racing.
Would Recommend
Excellent Product
5.0
3 years ago
Sr
Greensboro, NC
Verified
Installed in rear springs of 63 chevy impala, easy install helps if you spray soap suds in grooves. Would order again if needed.
Would Recommend
Great product
5.0
5 years ago
Screaming Pistons
Missouri
Verified
A little lube and they slipped right in.
Would Recommend
Showing 10 of 48 reviews
13 Questions • 12 Answers
will it fit my mercedes 2006 c230?
by Albert
• 6 years ago
1 answer
View Answer
How the heck do you install them? I have the 3 inch one and there is no way you can fit it between the coil springs. Any insight or tips on how to install would be appreciated.
by craigathan404
• 7 years ago
1 answer
View Answer
I have lowered my 2018 GMC Sierra using drop struts and factory springs. I'm looking to increase the spring rate very slightly to avoid occasional rubbing on larger dips in the road, would this be a good option? Thx
by Bar
• 8 years ago
1 answer
View Answer
I have a 2002 Lincoln Ls 3.9 l v8. I put larger wheels on it. Went from 17s to 20s. On the harder dips I get a rub. Would these spacers provide about an inch lift on my vehicle?
by Blackish
• 8 years ago
2 answers
View Answers
I have a 73 el camino and trying to stop the rear tires from rubbing, i tried a 1.5 inch aluminum spacer and raised it 2", will this product fit my car?
by Tony D
• 8 years ago
1 answer
View Answer
I have a 2013 Miata with aftermarket springs that lower the car and have an increased spring rate of 300 lbs. My objective is NOT to give me more height, but to stiffen the spring rate. The outside diameter of the spring is 4.7"; coil thickness is .5" No load (jacked up; wheel off) spring spacing is 1.2"; tires on is 7/8"-1". Looks like these will work. Just making sure before I order them.
by Ken
• 8 years ago
1 answer
View Answer
Do you have any with thickness greater than 2inch? I'm needing one around 2 1/4 to 2 1/2 inches.
by gtptim
• 9 years ago
1 answer
View Answer
I've got 2" drop springs on my 2015 ram but it sags on one side about a 1". Does this go in between the coils and would it fix the rear sag?
by Mike
• 9 years ago
1 answer
View Answer
Is this spring rubber designed to fit between the coils of a spring or on the top or bottom of a spring? Also what is the inside and outside diameter of this spring rubber? I see that is 7/8 spacer that is 1 inch wide but is it a U shape or an H shape?
by T
• 10 years ago
1 answer
View Answer
How much will it increase your spring rate?
by Casper1
• 12 years ago
2 answers
View Answers
10 of 13 questions shown
