Speedway Radiator Coolant Relief Valve for Non-Pressure Caps
Universal Fit, 1.62" Overall Length, .19" Inside Diameter, 1/4" NPT Thread Pitch, Brass
This valve is used with Speedway's aluminum T-bucket radiator (91015600). It threads into a 1/4" NPT hole in the top radiator tank and it limits the pressure in the radiator to 15 psi.
The aluminum T-bucket radiator does not use a conventional "pressure" radiator cap, rather it uses the decorative "T" caps to seal the neck at the top of the radiator.
The arrow on the valve indicates the flow from the radiator if unit has arrow noted on side of fitting. If no arrow is noted, the radiator side of the fitting or 'inlet' side can be identified as the end with the allen hex fitting threaded into the end of the unit. The oposite end or the smooth bore end on the opposite side is the 'outlet' end or the over flow hose side.
Required for 91015600
NotesThreads into Speedway Aluminum T-Bucket radiator to limit pressure to 15 psi. Required for PN# 91015600
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
Q & A
Tim talks about a few aluminum radiators we have to offer.
Speedway Motors employee Pat joins us once again. This time Pat is talking to the Model A and Model T owners, specifically in regards to Moto-Meters and accessories.
Speedway Motors and Classic Trucks used an AFCO radiator in the ground-up rebuild of the Speedway Motors 1952 Chevy truck.
Looking for an inexpensive radiator for your derby car? Check out this video to see why the Speedway Motors Universal Aluminum Radiator is the perfect solution.