|
#91076522
$128.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 4.25" Overall Height, Hardware Included
Need help?
855.313.9176Quick and Easy Returns
Return PolicyAs featured on Classic Truck’s Week to Wicked. Watch the transformation here!
These billet aluminum rectangular fuel fill doors work great in a pick-up bed or any flat surface. Can be flush mounted. Outer dimensions measure 5-1/2" x 4-1/4" while the door itself measures 3-1/4" x 4-1/2".CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91076522 |
| Brand | Speedway Motors |
| GENERAL | |
| Overall Height | 4.25" |
| Overall Length | 5.50" |
| Overall Thickness | .38" |
| Hardware Included | Yes |
| Material Type | Aluminum |
| Finish | Polished |
| Sold in Quantity | Each |
| Notes | Door is held closed by a magnet. |
4.4
14 Reviews
Customers appreciate the aesthetic appeal and quality of our product, often finding it a perfect fit for their antique vehicles. Several reviews mention successfully using it as a fuel door, mentioning its easy installation and flush finish. The material is described as well-made and heavy-duty, adding durability to its many features. Some users expressed minor issues with the assembly due to missing hardware, but overall, the product is highly recommended for its high-quality build and look.
4.4
14 reviews
5
9
4
3
3
1
2
1
1
0
Most Liked Positive Review
5.0
nice finish, looks good
product is good but takes some finess to actually flush mount it on a thin surface with minimal material left to secure after you cut the opening I am satisfied with the overall installation and appearance on my aluminum rear cowl on my T-Bucket
Most Liked Negative Review
2.0
Not all the parts were included
All I received was the door no hardware was in the package,they sent me a open box in my opinion. But I like the door very much, I used stainless steel hardware of my own to install the door. I would recommend this door but I was not happy with the fact that someone shipping an open box.
Filter by Ratings
I recommend the next size larger
3.0
2 years ago
Mike
Echo al.
Verified
Door is a nice well made piece but mechanism that holds it closed is a very poor design and the door is so small that with the mechanism installed you can hardly get your hand in it. So I made the bracket smaller and removed the magnet from original piece and JB welded it to the cut down original bracket If I was doing it again I would get the bigger door .
Would Recommend
Great looking on my 48 Ford F1 flatbed
4.0
3 years ago
Olshmid
Colorado
Verified
Would buy this product again.
Would Recommend
I would buy this product
5.0
7 years ago
Not Nickname
Idabel OK
Verified
Perfect product.
Yes
5.0
7 years ago
Jeremy
Tennessee
Verified
Looks great
Just what I needed
5.0
7 years ago
Gary
Coulters, PA
Verified
exactly what I needed,,, put a fuel cell under the bed of my 49 Ford PU,, this door fits flush across the bed , looks great & was easy to put on.
Would Recommend
Perfect fit.
5.0
8 years ago
Gary
Brodhead wi.
Verified
This fit perfect between the metal ribs in a 1968 Chevy wood bed floor with a LMC gas tank.
Would Recommend
Not all the parts were included
2.0
9 years ago
Randy
Dartmouth Massachusetts
Verified
All I received was the door no hardware was in the package,they sent me a open box in my opinion. But I like the door very much, I used stainless steel hardware of my own to install the door. I would recommend this door but I was not happy with the fact that someone shipping an open box.
Would Recommend
great quality and looks
5.0
9 years ago
mike
crestview fl.
Verified
this product is cool,just to small for your hand to remove fuel cap.
Would Recommend
Great people
5.0
9 years ago
Bill
Woods Cross, UT
Verified
Great service & quality products
Would Recommend
Clean and Polished
4.0
9 years ago
waywayne
HI
Verified
Be precise and considerate with attachment.
Would Recommend
Showing 10 of 14 reviews
1 Question • 1 Answer
Mounting over the ribs in the bed? How does this item mount over the ribs in the bed? It looks like it would not mount flat onto the bed. thanks Joe
by jroudej
• 11 years ago
1 answer
View Answer
1 of 1 questions shown
