Speedway Motors SBC/TH350 Black Dress-Up Kit, Oval A/C, Short V/C

Top off your SBC engine and TH-350 transmission with these complete dress-up kits.  They feature a durable black finish with stylish finned designs, sure to make your engine bay the envy of others.

Kit Includes:

• (1) 12" Finned Oval Air Cleaner
• (1) SBC Short Finned Valve Cover Set
• (1) 1-1/4" Finned Push-In Breather
• (1) 1-1/4" Finned Push-In Breather with PCV
• (1) SBC Finned Oil Pan
• (1) SBC/BBC 90 Degree Swivel Water Neck
• (1) Finned Wire Loom Set - 9.5mm Wire
• (1) GM TH-350 Transmission Pan
• (1) GM TH-350/TH-400 Flywheel/Flexplate Dust Cover
• (1) SBC Timing Chain Cover

12" Finned Oval Air Cleaner

This 12" oval air cleaner set will fit most stock and aftermarket carburetors with a 5-1/8" neck such as Carter, Edelbrock, Holley Rochester and Quadrajet four barrell carbs. This air cleaner set is full finned polished aluminum with an aluminum raised base to raise the air cleaner above the carb flange. This air cleaner measures 11-7/8" L x 8-1/4" W x 3" H and includes a stainless bolt for mounting.

• Fits 5-1/8" carb neck
• 11-7/8" L x 8-1/4" W x 3" H
• Full finned
• Raised base
• Paper filter
• Includes mounting bolt

SBC Short Finned Valve Covers

These finned polished aluminum valve covers fit 1958-1986 SBC 283-305-327-350-400 engines. These valve covers are baffled, short (OEM) style and each cover has one breather hole and accomodate 1-1/4" push-in style breathers.

• 1958-1986 SBC 283-305-327-350-400
• Baffled
• Short style
• 2-9/16" tall

1-1/4" Finned Push-In Breather

This push-in style breather fits 1-1/4" valve cover breather holes. This breather is finned black polished aluminum and 4" long x 2.25" wide.

• Fits 1-1/4" breather hole
• Billet aluminum
• Main body is 1.7" tall

1-1/4" Finned Push-In Breather with PCV

This push-in style breather with built in PCV valve fits 1-1/4" valve cover breather holes. This breather is finned black polished aluminum.

• Fits 1-1/4" breather hole
• With PCV valve w/ 3/8" hose barb

SBC Finned Oil Pan

This stock capacity oil pan is finned aluminum with a black finish. This oil pan fits 1958-1979 SBC 262-267-283-305-327-350-400 engines with a two-piece rear main seal. This oil pan comes with a bolt kit and draing plug. While the oil pump pick up is NOT included, you can use the original oil pump pickup if it's properly aligned for clearance.

• 1958-1979 SBC 262-267-283-305-327-350-400 with two-piece real main seal
• Use early-style thin front seal
• Finned aluminum
• Driver side dipstick
• 4 quart stock capacity
• Includes bolt kit & drain plug

Note: This oil pan will not fit 1962-1967 Chevy II or any Corvette models. This oil pan will not accomodate a windage tray.

SBC/BBC 90 Degree Swivel Water Neck

This 90 degree swivel water neck fits SBC & BBC V8 engines. This water neck includes 2 stainless steel bolts and o-ring gasket.

• SBC & BBC V8
• 90 degree swivel
• Includes 2 bolts & o-ring gasket

Finned Wire Looms - 9.5mm Wire

This universal finned aluminum wire loom set can handle up to 9.5mm wire and comes complete with four adjustable L-brackets. Installation hardware is also included with these looms.

• Up to 9.5mm wire
• Black finned aluminum
• Hardware included

Note: This wire loom set will not fit center bolt valve covers.

GM TH-350 Transmission Pan

This GM TH-350 transmission pan feautres a stamped 350 Turbo logo with drain plug. This transmission pan is stock capacity with a depth of 2".

• GM TH-350
• Stamped 350 Turbo logo
• Black steel
• Stock capacity
• 2" deep

GM TH-350/TH-400 Flywheel/Flexplate Dust Cover

Keep debris, dirt, and grime out of your transmission with this flywheel/flexplate dust cover.

• GM TH-350/TH-400
• Black

SBC Timing Chain Cover

This black steel timing chain cover fits 1955-1995 SBC 283-305-327-350-400 engines.

• 1955-1995 SBC 283-305-327-350-400
• Black
• Steel