|
#9190960
$111.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Ford 8 Inch
Need help?
855.313.9176Quick and Easy Returns
Return PolicyFord 8" Overhaul Kit includes differntial case side bearings, front and rear pinion bearings, pinion nut, pinion seal, gasket, shims, crush collar, sealant, gear marking grease, brush and Loctite.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 9190960 |
| Brand | Speedway Motors |
| GENERAL | |
| Notes | ALL 6 SHIMS ARE .001" THICK |
4.8
15 Reviews
Customers appreciate our product for its quality and practicality. They commend that everything fits perfectly and all the necessary elements are included, highlighting that even hard-to-find parts for older models are available. Customers value the precision of the fittings, although some did suggest a little more leniency could aid ease of application. This doesn't deter them from repeatedly choosing our products over others, affirming that everything ordered arrives as expected, in good condition and is effective in getting their job done. Even though the crush sleeve/spacer is absent in the kits, it's not a deal-breaker.
4.8
15 reviews
5
12
4
3
3
0
2
0
1
0
Filter by Ratings
great price for this product
5.0
2 years ago
Boat Racer
Palm Springs
Verified
This kit helps the set up and makes possible professional outcomes.
Would Recommend
i would recommend highly
5.0
3 years ago
fordlover 1
caldwell id
Verified
havent installed yet but looks good quality , resonable price
Only ones who had what I needed
5.0
5 years ago
Donnie Mac
Urbana ohio
Verified
Everything fit and you had the correct shims for an 8" Ford!!!
Just what I ordered
5.0
5 years ago
Tom Trainor
Hamilton, Ohio
Verified
It is refreshing in today's business atmosphere to get exactly what you ordered, in a timely manner with no damage, excuses, or hassle. Keep up the good work.
Would Recommend
Good quality and quick delivery to the uk
5.0
6 years ago
Chasey
Uk
Verified
Holes in gasket didn't line up very well
Would Recommend
I would buy again
5.0
6 years ago
Tony
Nebraska
Verified
Everything I needed
Would Recommend
Everything I needed.
5.0
7 years ago
Frank
North Carolina
Verified
Case to housing gasket is maybe a little to precise. Have to line up on all 10 studs at once or won't go on and will tear. If stud holes were just a little bigger it would give some room and make it easier to put on.
Would Recommend
GOOD PRODUCT
4.0
7 years ago
BRENT
green bay
Verified
GOT THE JOB DONE
Would Recommend
good and complete to overhaul a diff
5.0
7 years ago
geoff
mesa az
Verified
works just fine
Would Recommend
Good Products/Fast Delivery/As Ordered
5.0
8 years ago
dr
PA
Verified
Fast Delivery and product was in good shape and exactly as ordered
Would Recommend
Showing 10 of 15 reviews
7 Questions • 8 Answers
My Ford rear end is 8" verified by sockets working on bottom bolts. 59.25 inches width. Horizontal bars only on third member. Two dimples on casing. Smooth bowl shape to casing without bumps or notches. No fill or drain plug. Does this set work? Do you have axle seals, bearings, gasket sets for this axle?
by Jc
• 8 years ago
2 answers
View Answers
Do you make this kit with the Carrier Bearings to install a Eaton Detroit Trutrac 912A616 in the 8" rear end? Requires Bearing LM102949 and race LM102910 rather than the standard carrier bearings.
by Joe V.
• 9 years ago
1 answer
View Answer
Will this kit work with a 9" Ford rear end? If not why not.
by Brud
• 10 years ago
1 answer
View Answer
I have a 1972 Mercury Comet rear end with a 3.00 8" ring and pinion. The differential case has 10 bolts. The kit had a differential case gasket with only 9 holes. Can you send me the right gasket? Also, I'm wondering if there are any other problems with the kit.
by Brud
• 10 years ago
1 answer
View Answer
Will tis work on any 8" Ford rear end mid to late 60's?
by Joe
• 10 years ago
1 answer
View Answer
does this include an instruction sheet ford 8" rear end, being used in a 1936 ford with FH eng
by bobs36
• 12 years ago
1 answer
View Answer
is a crush sleeve included or not Your info says it comes with crush collar, a reviewer said it did not come with the kit...which is it?
by Torque2
• 12 years ago
1 answer
View Answer
7 of 7 questions shown
1962-1970 Ford Fairlane
1978 Ford Fairmont
1964-1970 Ford Falcon
1964-1965 Ford Falcon Sedan Delivery
1975-1978 Ford Granada
1970-1977 Ford Maverick
1964-1973 Ford Mustang
1974-1978 Ford Mustang II
1975-1980 Ford Pinto
1963-1964 Ford Ranch Wagon
1971-1974 Ford Torino
1975-1980 Mercury Bobcat
1964-1967 Mercury Caliente
1963-1977 Mercury Comet
1967-1969 Mercury Cougar
1964-1969 Mercury Cyclone
1975-1980 Mercury Monarch
1964-1968 Mercury Montclair
1971-1974 Mercury Montego
