|
#91007102
$8.49
/bag
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, .09" Wire Diameter, Steel, Zinc Plated
Need help?
855.313.9176Quick and Easy Returns
Return PolicySteel 1/4-turn panel fastener springs mount easily with pop rivets. Height of the spring from the mounting surface to the latching area is 0.150" to 0.175". Eye-to-eye measurement is 1-3/8".
Charts
Measurement Guide (JPG)
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91007102 |
| Brand | Speedway Motors |
| GENERAL | |
| Wire Diameter | .09" |
| Centerline of Holes | 1.38" |
| Material Type | Steel |
| Finish | Zinc Plated |
| Sold in Quantity | Bag |
4.9
34 Reviews
Customers highly appreciate the product's quality and features. They consistently mention the strong material quality of the springs and the ease of installation. Usability is highlighted, specifically for securing racing car panels and achieving quick, efficient access for maintenance. Customers found our fasteners sturdier, easier to work with, and offering a clean look, superior to alternatives. Product's adaptability is praised for both vintage and modern car builds. A noticeable issue was the flatness of some springs; however, most agreed they're worth it given their strength, secure hold, and the quick removal they allow. They are recommended for their great quality and price.
4.8
34 reviews
5
30
4
3
3
1
2
0
1
0
Most Liked Positive Review
5.0
Easy to install
This is my first time to use this style of fastener. You'll want a pop rivet gun for fastening these to the panel. I ended up making a second set of brackets as I needed to blow the first set in figuring out how to obtain a perfect alignment. Now I can see why these are used on so many cars.
Most Liked Negative Review
3.0
Too flat
The flat springs are too flat. I used the short dzus fastners and what I was fastening never became snug. I had to open all the springs up so things would be tight.
Filter by Ratings
Absolutely perfect for what I need.
5.0
11 months ago
Jo
Nebraska city
Verified
Great product. Great price.
Would Recommend
It's here
5.0
a year ago
Fast Freddy
Ga mountain
Verified
Alls well that ends well which happened
Would Recommend
Great fastener spring
5.0
a year ago
Red
Colorado
Verified
These for great and quality is on point
Would Recommend
Yes
5.0
3 years ago
Jim
Mechanicville, NY
Verified
Replacement of broken
Would Recommend
Good quality and quick shipping
5.0
3 years ago
Waynefish
Ewing, NJ
Verified
Speedway is my go to for most everything. Always great quality and quick shipping
Would Recommend
Would buy again
5.0
4 years ago
Robbie
Ny
Verified
Works great
Would Recommend
Yes if I needed them!
5.0
4 years ago
Harry
Marana, AZ
Verified
Used on removable rear apron on hot rod bug!
Would Recommend
.I will buy them again when i need them.
5.0
5 years ago
Nashrod
Hiawassee,CA
Verified
I haven't used any yet as the assembly process is about to start on the car body and interior. The 1/4 turn fastners will make the panels easily removeable for build, maint. and show on a 1939 Nash streetrod. They will be used to hold the top panel of the hood,the grill (2 changeable) panels over the gas tank and battery in the trunk as well as the tiltable dash
Would Recommend
I would buy again
5.0
5 years ago
Zeek
Indiana
Verified
Work very well and worth it
Would Recommend
Quarter turn fastener spring
5.0
5 years ago
TODD
Maui, Hawaii
Verified
Just what I needed to secure panels on my race car, and quick removal with ease.
Would Recommend
Showing 10 of 34 reviews
Be the first to ask a question.
