|
#715B10214
$131.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
1923 Model T, 22.50" Overall Length, 1.00" Flange Width
Made to Order
This custom item will ship when completed
Need help?
855.313.9176Quick and Easy Returns
Return PolicyCA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 715B10214 |
| Brand | Speedway Motors |
| Material Type | Fiberglass |
| GENERAL | |
| Overall Length | 22.50" |
| Overall Width | 19.50" |
| Overall Height | 9.50" |
| Flange Width | 1.00" |
| Sold in Quantity | Each |
| Notes | Narrows from 19.50" to 8" in the rear. |
4.9
33 Reviews
Customers consistently praise our product for its excellent fit, high-quality construction, and practicality. Users have successfully installed it in various vintage cars, proving its versatility and adaptability. While some have modified the product for specific applications, it's often highlighted as a great starting point, saving customers time and effort in fabrication. Some users have positively noted the need for minor adjustments or smoothing, reflecting its customizable nature. The ergonomic design guarantees easy installation, and customers appreciate the sturdy fiberglass material used. This product is recognised by customers as a superior, reliable solution for transmission tunnel issues, often outperforming competitors or individual fabrication attempts.
4.9
33 reviews
5
31
4
1
3
1
2
0
1
0
Most Liked Positive Review
5.0
I would tell people about this item & I would buy agian
When I fabricated a floor on my 1925 Model T Depot Hack, I needed a transmission tunnel. I tried to fabricate one, but I was not able to get the shape/look I wanted. This tunnel cover was the look I wanted for this custom build. This tunnel cover was smoothed on the inside and rough on the out side. It would be ok if you were coving it, but I was not, so I used bondo filter to smooth the out side to get the smooth look I needed
Most Liked Negative Review
3.0
Some what ok
I have not installed the product but could use some kind of instructions for installation. 1, make holes for the shiftier. 2. how far apart holes for bolts to floor board
Filter by Ratings
A Must Have for a Chrysler trans in a T-Bucket
5.0
a year ago
Drock
St. Louis Mo
Verified
This tunnel worked great. The tunnel that was in the car was made for a chevy or ford trans and not a wide Chrysler 727. This took care of that problem.
Would Recommend
Yes
5.0
a year ago
N
Mn
Verified
Nice
Would Recommend
Trans Tunnel
5.0
2 years ago
D
Lorain Ohio
Verified
Very good product
Would Recommend
Clean, well made, and time saved making one.
5.0
2 years ago
Madwoody
Chicago
Verified
Easy to install trans tunnel clean gel coat backside. Installed easily into my mucked.
Would Recommend
I would buy from Speedway every time.
5.0
3 years ago
Poppy
27587
Verified
looks great.
Would Recommend
I would tell people about this item & I would buy agian
5.0
3 years ago
Bob the Fab Guy
Wilmington, Ohio
Verified
When I fabricated a floor on my 1925 Model T Depot Hack, I needed a transmission tunnel. I tried to fabricate one, but I was not able to get the shape/look I wanted. This tunnel cover was the look I wanted for this custom build. This tunnel cover was smoothed on the inside and rough on the out side. It would be ok if you were coving it, but I was not, so I used bondo filter to smooth the out side to get the smooth look I needed
Would Recommend
I only needed one, but I plan to buy a lot more parts.
5.0
3 years ago
none
Phoenix, Arizona
Verified
This was only one of many parts I have bought and plan to buy from you.
Would Recommend
Fiberglass Tranny Tunnel
5.0
4 years ago
Hot Rod Gary
Fort Collins, Colorado
Verified
Used in my 1928 Dodge. Fit perfect.
Would Recommend
it will be fine for my application
5.0
5 years ago
guido
north end of Boston
Verified
easy to adapt to other cars
Would Recommend
I would defiantly buy this again.
5.0
6 years ago
Curt
Lakeland, Fl.
Verified
Went in my 23 T bucket. And it fit!!
Would Recommend
Showing 10 of 33 reviews
2 Questions • 5 Answers
Can I use the part #715B10214 with my 700R4 transmission?
by Tom
• 8 years ago
3 answers
View Answers
inside dimensions what are the inside dimensions height and width of the tunnel across the front?
by Abbegale
• 13 years ago
2 answers
View Answers
2 of 2 questions shown
1923 Ford Model T
