Details

Just in case you can't step up to a $300 digital caster/camber gauge, we offer this very affordable bubble unit. Easy to use and handy to boot, this little jewel will read +/- 7° and is accurate to 1/8°. Adjustable magnets attach to your hub. Aluminum construction.

Charts

910-82610 Instructions (PDF)

Caster Angle Illustration (GIF)

Guides & Documents

Caster/Camber Gauges Installation Instructions (91082610)

Caster/Camber Gauges Technical Information (91082610)

Ratings & Reviews

4.7

21 Reviews

Overall Assessment

Customers applaud the product for its high quality, ease of use, and practicality. Many users found it initially tricky, but after a learning curve, they appreciated its simplicity and efficiency. The tool’s accuracy in setting camber and caster has been repeatedly mentioned and celebrated. Its compact size adds to its practicality, allowing use inside a garage or on the go. Customers particularly recommend it to home mechanics and race car owners, noting significant time savings in comparison to professional alignments. The value for money is emphasised, with most reviewers noticing that other more expensive tools don’t bring better results. The area for improvement suggested was an adapter for use with aluminum wheels. Overall, customers recommend the product for its accuracy, simplicity, and cost-effectiveness.

Write A Review

4.7

21 reviews

Filter by Ratings

Sort Reviews

I recommend to set your own alignment

5.0

7 years ago

Oldplow

Verified

A little tricky to use at first. But got the hang of it. Get tool.

Would Recommend

used before years ago still does the job

5.0

7 years ago

ric

a;abama

Verified

great for occssional and set up use saves money over other types

Would Recommend

Perfect for the home garage

5.0

8 years ago

Steve

Ontario

Verified

Nice little piece for the home mechanic...can't beat it for the price....did what it suppose to.

Would Recommend

I would buy this again.

4.0

9 years ago

Parts Guy

Grimes, Iowa

Verified

Seems a little unhandy at first. But what little I have messed with it seems to do the trick.

Would Recommend

Works exactly as advertised!

5.0

10 years ago

Steve from Florida

Verified

I set my camber & caster after an upper control arm replacement. Both camber & caster were in spec when checked on the alignment machine. It took a little practice to get used to the tool, but it worked perfectly. Would be nice if there were +&- symbols on the tool, but you get used to that.

Would Recommend

simplicity is a virtue

5.0

10 years ago

rapid rickey

Albuquerque, NM

Verified

worked great setting caster and camber. drove and re-checked measurements,and they were the same. a straight forward simple tool that works!

Would Recommend

Worked just as planned, nice simple gauge, worked fine.

5.0

10 years ago

Mighty427

Illinois

Verified

For one time use or infrequent use, great product!

Would Recommend

Entirely adequate

4.0

11 years ago

Jim wc

West Covina, CA

Verified

I've used a Longacre caster/camber gauge before, and thus one gets the same results with a little more work. The instructions were good and the product seems sturdy enough.

Would Recommend

Perfect Tool

5.0

11 years ago

BMod10

Omaha, NE

Verified

Very easy to use, helpful directions Very well built

Would Recommend

Excellent product!!

5.0

11 years ago

Notnilc20

Memphis

Verified

Eqsy to use. Just set the gauge to level first then Mount gauge using the magnets to hub or disk brake. Turn knob noting how many dials you need to turn in order to get the bubble back to level and that is your camber. If you needed to turn the knob 4 dials counterclockwise then you are 4/8 or 1/2 a degree negative camber. If you had to turn it clockwise 3 dials, then you are 3/8 a degree positive. If you had to go a full turn and 5 dials counterclockwise then yes you guessed it 1 and 5/8 a degree negative. Great quality too. Much better than other gauges in this price range because it works in fractions of a degree so you get a much more accurate reading. The other gauges in this range show a bubble and a lines representing degrees but it's difficult to determine what it is reading when the bubble is sitting between two numbers. So this gauge by speedway motors is far superior. Oh yeah, and the shipping was crazy fast. Thank you!!!

Would Recommend

Load More Reviews

Showing 10 of 21 reviews

Questions & Answers

8 Questions • 11 Answers

Sort Questions

How do you know the bubble Is set to zero before installing. I did not see that on the instructions.

by Lil Bear

• 9 years ago

1 answer

View Answer

Would this be good to use on a dirt modified?

by J.H.

• 10 years ago

1 answer

View Answer

How can this work on a car with mag wheels mounted ? there are two arms coming off the upright. where do they mount ? Thanks !!

by RATTLER

• 11 years ago

1 answer

View Answer

why do you turn the wheel in 20 degrees first. all other gauges say to turn the wheel OUT first.

by cowboy2

• 11 years ago

1 answer

View Answer

measures castor? How do you measure castor with this tool?

by MattB

• 12 years ago

1 answer

View Answer

if you have aluminum wheels and you have to stick gauge on rotor and put jack stands under the a-arms how do you level the car??? 67 nova with a heidts superride front end

by abfdan

• 13 years ago

1 answer

View Answer

If there are no numbers on the gauge how do you tell caster/ camber with it ? thank-you

by Tom

• 14 years ago

3 answers

View Answers

How big is this product in size? Would you tell me the length, width, height, and weight please?

by jimmy

• 15 years ago

2 answers

View Answers

8 of 8 questions shown