|
#91073077
$65.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Sprint Car, Stainless Steel, Front Position, Polished
| MFG. Part # | 91073077 |
| Brand | Speedway Motors |
| Material Type | Stainless Steel |
| Position | Front |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyPolished stainless construction looks great and protects even better! Stop fighting nose wing damage and movement caused by nose to tail contact. These stylish options fit any chassis with bumper spuds on a 19" centerline. The width center line is 19-1/8". The depth of the unit is 7.688".
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91073077 |
| Brand | Speedway Motors |
| Material Type | Stainless Steel |
| Position | Front |
| GENERAL | |
| Finish | Polished |
| Tube O.D. | 1" |
| Overall Width | 20.25" |
| Overall Height | 5.75" |
| Depth | 7.68" |
| Center to Center | 19.125" |
| Sold in Quantity | Each |
4.8
14 Reviews
Customers value the product for its impeccable fit, quality, and practicality. Many mentioned that it seamlessly complements their custom built or racing cars for both aesthetics and function. Noted for its shine and excellent workmanship, the product's remarkable durability, strength, and superior protection have also been underscored, making it a recommended product over competitors. Although some mentioned fit issues, the product's confirmed qualities and usability in hard racing conditions makes it a favored choice for customers.
4.8
14 reviews
5
13
4
0
3
0
2
1
1
0
Most Liked Positive Review
5.0
More Bang for your Buck !!!
Speedway is where to buy these Great Stack Bumpers. We use the Bumper, so they must be strong and durable. Nicely plated, and great fit too. I strongly recommend these Bumpers.
Most Liked Negative Review
2.0
Strong, however fit was poor.
Had to grind away excess weld in order to get the bumper to fit into the mounts. Seems like the vertical bars were a bit too short, the top bar then ended up too close to the mounting ends. When welded, the length of clean bar left was only about a half inch which is far too short for a good mounting to the car. That manufacturing error needs to be corrected ASAP.
Filter by Ratings
Good quality mover
5.0
6 months ago
1rrob
Memphis tn
Verified
Used to move other cars
Would Recommend
great product
5.0
a year ago
mrjeffwhite
quebec CA
Verified
exactly what i need
Great Bumper
5.0
2 years ago
Jim
PA
Verified
Used on Maxim, Fit Perfectly, welds looks good
Would Recommend
Yes
5.0
2 years ago
Hammer
Hanover Pa
Verified
Front of my sprint car… fit and really looks great will help save my front wing, when my driver tags someone…. Thanks for a great product
Would Recommend
Perfect! Just what I wanted!
5.0
6 years ago
A Kool J
SLC, Ut
Verified
Perfect fit on my 27 T roadster! Grew up around supermodified racing, love the look. easy to install. Just welded a couple pieces of round tubing to the front of my frame...fit and look awesome!
Would Recommend
Nice Shiney Will look good on my street rod
5.0
8 years ago
U Boat
Western NY
Verified
Nice Shiney Will look good on my street rod... My state needs a front bumper on "custom" builds, this actually looks good on a "Tee".
Would Recommend
More Bang for your Buck !!!
5.0
8 years ago
Retired 98
Hermosa Beach, California
Verified
Speedway is where to buy these Great Stack Bumpers. We use the Bumper, so they must be strong and durable. Nicely plated, and great fit too. I strongly recommend these Bumpers.
Would Recommend
Great product
5.0
10 years ago
98 owner
Southern California
Verified
Great bumper for my non wing Sprint car. The free shipping was just too SLOW. Never again. Pay for the shipping.
Would Recommend
Strong, however fit was poor.
2.0
10 years ago
Dannyboy
New York
Verified
Had to grind away excess weld in order to get the bumper to fit into the mounts. Seems like the vertical bars were a bit too short, the top bar then ended up too close to the mounting ends. When welded, the length of clean bar left was only about a half inch which is far too short for a good mounting to the car. That manufacturing error needs to be corrected ASAP.
Would Not Recommend
Excellent Workmanship!!
5.0
10 years ago
Smitty
Holliston, MA
Verified
I will use this as a rear bumper on a 34 Ford Coupe
Would Recommend
Showing 10 of 14 reviews
1 Question • 2 Answers
what are the actual dimensions ,would like to install on a dune buggy chassis
by
• 15 years ago
2 answers
View Answers
1 of 1 questions shown
