|
#91072306
$27.99
/set
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Steel, Zinc Plated
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpecs
Length 4-5/16"
Width 2-9/16"
Height 7/16"
Material thickness 0.130"
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91072306 |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Zinc Plated |
| GENERAL | |
| Sold in Quantity | Kit |
4.8
12 Reviews
Customers highly regard the product for its excellent design, particularly in the context of seat belt mounts. Notable features include robustness, simplicity in installation, and adaptability to various models including a '55 Chevy truck, '58 Chevy, and '64 Riviera. The seatbelt doubler plates are commended for their solidity and impressively broad load distribution, surpassing the capabilities of large washers. Despite occasional customization needs, there's a clear consensus that the product provides a strong, trustworthy hold. Buyers express a willingness to purchase again.
4.8
12 reviews
5
10
4
1
3
1
2
0
1
0
Most Liked Positive Review
5.0
Terrific seatbelt doubler plates
Using these under the floor pan of 58 Chev and 64 Riviera. They provide a very solid mount for the fitted seatbelts. Much better than merely fitting big washers, as the convex lip distributes the load over a much bigger area
Most Liked Negative Review
3.0
It's a boring seatbelt plate what can I say
Like how stout it is and like the zinc plating. Was disappointed that there was no nuts welded on
Filter by Ratings
I would buy again
4.0
a month ago
Bob
San Bruno Ca.
Verified
Good…. Strong and coating is nice. Bad…no threaded nut ( welded)
Would Recommend
It's a boring seatbelt plate what can I say
3.0
a month ago
Pain in the ass
San Bruno
Verified
Like how stout it is and like the zinc plating. Was disappointed that there was no nuts welded on
Would Recommend
If needed, I would surely buy this product again.
5.0
2 years ago
Dean
Longmont, CO
Verified
Perfect application for the need.
Would Recommend
I would recommend this product
5.0
2 years ago
D
NY
Excellent design for seat belt mounts
Would Recommend
These worked great on my 55 Chevy truck.
5.0
3 years ago
JC
Los Angeles CA
Verified
These worked great on my 55 Chevy truck. They did the job.
Would Recommend
Made heavy duty
5.0
4 years ago
Crank
Illinois
Verified
Worked well for my project
Would Recommend
Great Speedway Service................Like Always!
5.0
4 years ago
Hopalong
Roswell, GA
Verified
Updating my '32 Ford Roadster and adding the Speedway Touch......
Would Recommend
Terrific seatbelt doubler plates
5.0
5 years ago
Deano K.
Portland, OR
Verified
Using these under the floor pan of 58 Chev and 64 Riviera. They provide a very solid mount for the fitted seatbelts. Much better than merely fitting big washers, as the convex lip distributes the load over a much bigger area
Would Recommend
Very solid
5.0
5 years ago
Matt
Southern MD
Verified
Very beefy seat belt anchors. I had to trim them for my application, but I have no concerns that these might fail.
Would Recommend
deluxe seat belt oval anchor plates
5.0
8 years ago
Auggie
Munford, Tn.
Verified
work very well and makes a nice strong hold for the seat belts.
Would Recommend
Showing 10 of 12 reviews
1 Question • 1 Answer
What size is the hole?
by Clint
• 2 years ago
1 answer
View Answer
1 of 1 questions shown
