|
#91635015
$57.99
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 3.50" Overall Width, Steel, Painted
Need help?
855.313.9176Quick and Easy Returns
Return PolicyCharts
Installation Guide (PDF)
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91635015 |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Painted |
| GENERAL | |
| Overall Width | 3.50" |
| Overall Height | 7.00" |
| Overall Thickness | .25" |
| Bolt Hole Pattern | 2.25 x 2.00 |
| Degree of Taper | 7 degree |
| Sold in Quantity | Pair |
4.8
39 Reviews
Customers have highly praised this product for its quality, durability, and ease of installation. It fits well with original frame models and specific builds like the 21 Willeys or 1930 Ford, indicating its versatility. Buyers appreciated it as a labor-saving product that simplifies the mounting process. The material quality stands out, being described as strong and durable. The aspect of no welding being required for installation is seen as an advantage. Users also remarked on its neat, clean and straightforward design. Some modifications may be required, and a few suggested the provision of different hole sizes. However, the general consensus is favorable, with many customers open to repurchasing and recommending the product.
4.8
39 reviews
5
33
4
4
3
2
2
0
1
0
Most Liked Positive Review
5.0
Good and simple
These are good, simple pieces for those looking for some old school flavor. They are remarkably similar to the ones that I cut off my A-bone (built in the mid fifties) when I started stripping it. The holes are just enough oversize to allow about .015" wiggle for fine tuning the alignment. I would have preferred a bare/bead blasted finish as it would have saved me the step of stripping them to ensure that there weren't any compatibility issues with my finish.
Most Liked Negative Review
3.0
do not hang lower
Wanted to recreate the look that was on frame already with spring over axle. As stated in discription that this works,, and it does, however the other style hanges just as low under frame. Thought this was a little different, it is in only that can gets bolted on.
Filter by Ratings
Great product
5.0
8 months ago
MojoRacing
Florida
Verified
I highly recommend these wishbone brakets. Very good quality, worked perfectly on my model a Ford frame. Perfect length.
Would Recommend
Quality made product, worked great.
4.0
10 months ago
Simon
Phoenix, Az
Verified
Well made hangers. Quality steel, welds easily. Saves time when you dont have to make every bracket needed!!!
Would Recommend
if needed, I would buy again
4.0
a year ago
animal
ogle il
these are the easy way to, mount radius rods, and cheap enough, to warrant not making them myself
Would Recommend
if needed, I would buy again
5.0
a year ago
animal
ogle il
use to mount, the frame end of radius rods
Would Recommend
Perfect fit
5.0
a year ago
John
Ohio
Verified
Uses on my 30 model a worked great
Would Recommend
Great Strong Brackets
5.0
2 years ago
JimBob
Sutherlin, OR
Verified
These are bolt on and extremely strong.
Would Recommend
great product, they look great
5.0
2 years ago
speedster
Pennsylvania
Verified
helped tie in the front suspension
Would Recommend
Very nice piece
5.0
5 years ago
PaPa
Crescent City, Ca
Verified
Really helps buying from a bunch of Pros, my 21 Willeys is coming together very nicely with Speedways help and parts,,,,,,, yeah
Would Recommend
Great product, and definitely worth buying again!
5.0
5 years ago
Matt
Lampasas Texas
Verified
Easy, and simple installation. Looked very clean, and very durable!
Would Recommend
Great fit good
5.0
6 years ago
Roberto Marquez
Wilmington ca
Verified
It match to original frame model a
Would Recommend
Showing 10 of 39 reviews
6 Questions • 14 Answers
I'm running full fender, 4inch dropped axle, original leafspring, reversed eye main leave, original split wishbones, With 6 degree caster on the front axle, this frame bracket is not long enough. I had to make a plate to extent it. I have never seen a bracket that extended so low beneath the frame.Did I make a wrong turn somewhere? Do I need to alter the radiusrod?
by Longboard
• 7 years ago
1 answer
View Answer
Where does this bolt on the frame in existing holes or i drill new ones? The d in the email is lower case don't know why your thing keeps it capital
by Oldsman
• 8 years ago
5 answers
View Answers
Do these plates mount to the outside or inside of the frame?
by farmerdick
• 9 years ago
5 answers
View Answers
Please give dimensions. i.e. center of radius rod hole to top of bracket.
by Peter
• 10 years ago
1 answer
View Answer
Do these brackets come as a weld on bracket without the 4 drilled holes.
by Stick
• 15 years ago
1 answer
View Answer
When I've drilled the brackets out for use with your 5/8 heim ends, does it matter which side of the bracket faces the outside of the frame??
by olguy
• 15 years ago
1 answer
View Answer
6 of 6 questions shown
