|
#91076409
$37.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 2.13" Inside Diameter, Aluminum, Natural
Need help?
855.313.9176Quick and Easy Returns
Return PolicyKnurled aluminum cap and threaded aluminum neck. Requires welding. O-ring seal inside cap for positive seal on non-vented applications.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91076409 |
| Brand | Speedway Motors |
| GENERAL | |
| Inside Diameter | 2.13" |
| Cap Diameter | 2.80" |
| Thread Pitch | 2.50"-17 or metric 1.50 |
| Material Type | Aluminum |
| Finish | Natural |
| Sold in Quantity | Each |
| Notes | O-ring positive seal cap for non-vented applications. |
4.6
14 Reviews
Customers rave about the quality and practicality of our product, with many appreciating the right size and efficient cap sealing. The cap material is commended for welding well, and its fine thread quality necessitates proper usage for longevity. It successfully serves as a replacement for inferior caps and enhances custom projects like Jeep fuel cells. Our aluminum cap is deemed a valuable improvement over plastic alternatives, showing superior durability. While it's a non-American product, it's praised for its easy-to-weld material and polished finish upon installation. Some customers recommend adding anti-seize for extended service life. It's considered worth the investment, despite being sold with a bung.
4.6
14 reviews
5
11
4
1
3
2
2
0
1
0
Most Liked Positive Review
5.0
Used for a custom Jeep fuel cell
I TIG welded it on a custom aluminum fuel fell for my 68 jeepster commando. I worked great. has o ring inside. Its a fine thread cap so I'll just have to keep the dirt out of the threads and be diligent about not cross threading it as time goes on Also bought roll over vent and AN fittings
Most Liked Negative Review
3.0
Gas cap & bung
All I needed was the gas cap! They would only sell me both cap & bung. Very expensive gas cap.
Filter by Ratings
Yes I would
5.0
4 years ago
Cliff's t
Abilene Tx
Verified
Worked great
Would Recommend
Have used this before
5.0
5 years ago
Rowdy
Newport Tennessee
Verified
The right size and good seal on cap
Would Recommend
We'll do this again!
5.0
5 years ago
Nash Rambler
Visalia Ca
Verified
Worked perfectly! Material welded perfectly. Very happy with this product
Would Recommend
Great product, would purchase again if needed!
5.0
7 years ago
Bob
Bradford TN
Verified
Replacement cap!
Would Recommend
Used for a custom Jeep fuel cell
5.0
8 years ago
Jeep guy
Calgary AB
Verified
I TIG welded it on a custom aluminum fuel fell for my 68 jeepster commando. I worked great. has o ring inside. Its a fine thread cap so I'll just have to keep the dirt out of the threads and be diligent about not cross threading it as time goes on Also bought roll over vent and AN fittings
Would Recommend
Great for my aluminum fuel cell
5.0
9 years ago
Bill g
Long island
Verified
I didn't like the plastic cap on my fuel cell so I replaced it with the aluminum cap from Speedway and it worked out great!
Would Recommend
I would definitely buy this again in the future
5.0
9 years ago
Bill g
Long island
Verified
Great piece for the money! Worked out great for my aluminum fuel cell.
Would Recommend
Great Fill cap
5.0
9 years ago
Bill
Montgomery Pa
Verified
Worked very well for MY Aluminum fuel tank
Would Recommend
Looks good
5.0
9 years ago
Blaster
Minn
Verified
Welded on great
Gas cap & bung
3.0
12 years ago
dub1947
Independence, MO, USA
Verified
All I needed was the gas cap! They would only sell me both cap & bung. Very expensive gas cap.
Would Recommend
Showing 10 of 14 reviews
1 Question • 3 Answers
what thread is the cap? trying to replace a cap I just lost.
by carnut14
• 12 years ago
3 answers
View Answers
1 of 1 questions shown
