|
#91645552
$38.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Modified, Stock Car, 5.00" Flange Diameter, Zinc Plated
Need help?
855.313.9176Quick and Easy Returns
Return PolicyMaximize your spring tuning capabilities with these adjustable spring shims. Extended-style for use with shorter springs. Threaded steel two-piece design. Adjust the shim to where you want and then spot weld it.
Features a 2-7/8" center hole to allow use with stock style shocks. Can be used with either 5" or 5-1/2" diameter springs.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91645552 |
| Brand | Speedway Motors |
| GENERAL | |
| Flange Diameter | 5.00" |
| Flange Width | .279" |
| Outside Diameter | 4.46" |
| Inside Diameter | 4.238" |
| Hole Diameter | 2.925" |
| Overall Length | 5.15" |
| Thread Length | 2.55" |
| Finish | Zinc Plated |
| Sold in Quantity | Each |
| Notes | Has 2-1/2" of cut-to-length material. |
| Material Type | Steel |
4.8
18 Reviews
Customers highly appreciate our product's adaptability, quality and practical usage, highlighted by its easy adjustment feature. Many users repeatedly bought it for diverse car projects, testifying to its effective performance. Its main strength lies in elevation modification abilities, with buyers setting their cars' front and ride heights precisely where needed. The smooth threaded component simplifies spring adjustment, optimizing car setup. Notably, one user ingeniously utilized the product to counter a part alteration, confirming its versatile use. Despite some wishing for an added flange, the product overall receives unanimous approval for its value and seamless functionality.
4.8
18 reviews
5
16
4
1
3
1
2
0
1
0
Most Liked Positive Review
5.0
Can be used to lower street driven car
Used these with 9.5" coil springs to lower street driven car at a lower price than lowering springs. A big plus is they can be adjusted to exactly the ride height you want.
Most Liked Negative Review
3.0
great testing tool
I run these on a metric car (street stock). they were a little to tall to start with, I cut them down to fit in. after that they were great.
Filter by Ratings
I would buy this product again if I needed it
5.0
a year ago
Spence
Old Hickory TN
Verified
As it turned out I didn't have to in stall the spring shim. I ordered this product it looked like it would be a better way to get the ride height over using a rubber shim.
Would Recommend
All jacked up.
5.0
4 years ago
41 chevy
Bridgeville, DE
Verified
It would be nice if a second threaded flange was provided to lock against each another. I'm not sure the adjustment could change over time from vibrations, but it would be nice to be able the lock the flange in place.
Would Recommend
i would buy this product again
5.0
4 years ago
Stan the tool man
Rapid City SD
Verified
I needed to raise the front of my Gen 1 Monte Carlo and it worked perfect. they are adjustable so I was able to set the front exactly ware I wanted
Would Recommend
Good quality good price
5.0
5 years ago
Buck
Ohio
Verified
Easy to adjust
Would Recommend
Yes it worked good and will be buying again
5.0
5 years ago
Kevin the man
Sunflower MS
Verified
This part went on my race car
Would Recommend
I would buy this again and has to....
5.0
6 years ago
Hooptie fixer
New York NY
Verified
Used this to make up for the two inch difference that new a arm added to my car.....
Would Recommend
exactly what I needed
5.0
6 years ago
RyFab,llc
Miami, Fl
Verified
Great price, perfect finish and exactly what I needed to complete this project
Would Recommend
It was just what I needed to raise the height of my car.
5.0
7 years ago
Kyracer54
LOUISVILLE, kENTUCKY
Verified
rAISED THE REAR OF MY CAR 3 INCHES TO POVENT THE FENDER BINDING ON THE REAR TIRE.
Would Recommend
Great product, works perfect
5.0
8 years ago
Johnny rocket
Tyngsboro ma
Verified
Bought for my street stock build, works awesome
Would Recommend
Just as expected
5.0
8 years ago
Ooph!
Santa Cruz,Ca
Verified
Good Product
Would Recommend
Showing 10 of 18 reviews
7 Questions • 7 Answers
Is it possible to find a lock ring that will thread on to these so that spot welding is not required? The shape and size of this is perfect for my needs, but I would like it to be useable for multiple setups on my car without cutting welds.
by Five-Oh Bilbo
• 7 years ago
1 answer
View Answer
Will these work on a 1971 chevelle of course they have conical ends on the of the springs?
by George
• 8 years ago
1 answer
View Answer
do these have to be welded in? or can they float on top of spring?
by ss7
• 10 years ago
1 answer
View Answer
Can this item be used in a 2wd application? I'm looking to use it on my 2003 Ford Ranger
by Ando
• 10 years ago
1 answer
View Answer
I wanted to ask if this would fit my 1991 toyota 4runner91
by alex160
• 12 years ago
1 answer
View Answer
would these fit my springs? Would these fit a 146mm internal diameter spring safely for street and 4wd use?
by karl
• 13 years ago
1 answer
View Answer
Does my coil spring sit in the cup when installed, of fit over the threaded area, an the cup installs up into my coil bucket?
by Krusty
• 14 years ago
1 answer
View Answer
7 of 7 questions shown
