Speedway 3 Piece 1-1/2 Inch Radiator Hose Kit

These 45° bend silicone radiator/coolant hoses can be cut to length, allowing you to build just what you need. This 3 layer, reinforced silicone material exceeds SAE standards and is designed for todays high temp, high pressure cooling systems (-100ºF to +380ºF rated).

These 6" long silicone radiator/coolant hoses can be cut to length, allowing you to build just what you need. This 3 layer, reinforced silicone material exceeds SAE standards and is designed for todays high temp, high pressure cooling systems (-100ºF to +380ºF rated).

Measures 12" along outermost edge. Choose hose diameter (I.D.) needed.

These have a bead at each end and can be cut to length. Comes in a 3" length.

Gator Brand Performance Hose Clamps, Size Range: 1.250"-2.000" OR 35mm-50mm.

Gator Brand Clamps are produced using a stainless steel continuous band with extruded, asymmetrical threads for reliable performance. The edges of the band are rolled to prevent any sharp edges from damaging the hose. This is especially important on silicone hoses that have a soft, vulnerable cover.

• Constructed of continuous stainless steel band with extruded, asymmetrical threads
• Asymmetrical (offset) gear box employed to reduce clamp twist when tightening
• Combination of asymmetrical gear box and extruded threads provides even clamping force over surface of hose
• Hold up under 3.7 ft./lbs. (5nm) torque
• Cover size range of 5/16" (8mm) to 5.000" (120mm)