|
#91032378
$20.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 1.00" Overall Length, Aluminum, Anodized
| MFG. Part # | 91032378 |
| Brand | Speedway Motors |
| Overall Length | 1.00" |
| Material Type | Aluminum |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyGuides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91032378 |
| Brand | Speedway Motors |
| Overall Length | 1.00" |
| Material Type | Aluminum |
| GENERAL | |
| Overall Diameter | 1.500" |
| Inside Diameter | .700" |
| Finish | Anodized |
| Sold in Quantity | Each |
4.3
11 Reviews
Customers appreciate the product for its easy-to-use and highly practical nature. They noted it is well built, with a compact, nice-looking design, effectively doing what it's supposed to without taking up too much space. However, some customers expressed concerns about the length of the bolts, advising not to overtighten them. The product is generally recommended for its quality and functionality over similar options on the market.
4.3
11 reviews
5
8
4
1
3
0
2
1
1
1
Most Liked Positive Review
5.0
Very good quality part, I would buy it again.
Unfortunately I didn't use the collar on this project, because the overall diameter with the screws installed exceeded the 1 1/2 " steering column hole. It will get used later on a different project. It's a very good part
Most Liked Negative Review
1.0
does not work at all.
The bolts are barely long enough before you put it on the shaft. It measures 5/8 ID I know it has to clamp, but with the supplied bolts as soon as you put the collar on a 3/4 shaft the bolt goes about one thread into the collar. I dont think the other reviews are real, or they did the review before trying to use the part. There is no way this part will ever work as designed.
Filter by Ratings
Works perfectly
5.0
9 months ago
Rusty
New Hampshire
Verified
Helped my steering linkage from binding up
Would Recommend
Cost effective solution
5.0
a year ago
Kracer
Indy
Verified
This product works as expected. Easy installation.
Would Recommend
I would buy this again no doubt
4.0
a year ago
Killa K
Kansas
Verified
Held up perfect on my derby car.
Would Recommend
Very good quality part, I would buy it again.
5.0
2 years ago
Doolittle
Washington
Verified
Unfortunately I didn't use the collar on this project, because the overall diameter with the screws installed exceeded the 1 1/2 " steering column hole. It will get used later on a different project. It's a very good part
Would Recommend
Rowdy says nice piece
5.0
4 years ago
Rowdy Rod
Centralia Illinois
Verified
Easy to use
Would Recommend
I would buy again.
5.0
5 years ago
Spridget1275
Indy
Verified
Great
Would Recommend
good...and bad
2.0
7 years ago
Vyn
arizona
Verified
sadly these are still shipping with the wrong hardware.... the allen head bolts are to short to even work.... the collar itself looks like it will do the job!
does not work at all.
1.0
7 years ago
AJ
Texas
Verified
The bolts are barely long enough before you put it on the shaft. It measures 5/8 ID I know it has to clamp, but with the supplied bolts as soon as you put the collar on a 3/4 shaft the bolt goes about one thread into the collar. I dont think the other reviews are real, or they did the review before trying to use the part. There is no way this part will ever work as designed.
Would Not Recommend
I would buy his again
5.0
8 years ago
Clint
Kentucky
Verified
Works great does exactly what it's suppose to do just don't over righting the bolts
Would Recommend
Nice unique part
5.0
9 years ago
Sandy
Los Angeles
Verified
Nice part, using it for a Sweet Mfg column and much nicer looking then the round collar type.
Would Recommend
Showing 10 of 11 reviews
Be the first to ask a question.
