|
#91032560
$76.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
5.00" Center to Center, 1.21" Hole Diameter, 0.75" Drop
| MFG. Part # | 91032560 |
| Spline Count | 32 and 4 master |
| Drop | 0.75" |
| Material Type | Steel |
| Finish | Zinc Plated |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyCA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91032560 |
| Brand | Speedway Motors |
| Spline Count | 32 and 4 master |
| Drop | 0.75" |
| Material Type | Steel |
| Finish | Zinc Plated |
| GENERAL | |
| Center to Center | 5.00" |
| Hole Diameter | 1.21" |
| Top of Taper | 0.531" |
| Bottom of Taper | 0.462" |
| Degree of Taper | 7 degree |
| Sold in Quantity | Each |
| Notes | Fits common "4-bolt" top Sweet, 800 Series GM, "Big Spline" 700 Series Saginaw, and "Big Spline" 600 Series Delphi boxes. This pitman arm is ONLY correct for the '68-'72 midsize GM vehicles. |
4.8
12 Reviews
According to customer reviews, the product fits correctly and is praised for its practicality and usability, including its role in completing an entire new steering system. It is particularly popular for annual replacements and is favorably mentioned for working well with 64-67 Chevelle models with power steering. However, there were instances reported where modification was needed for specific applications or it was too long for fitment in certain models. The quality of the product materials are lauded as 'nice'. Despite some discrepancies in fit for certain models, several customers confirm they would purchase it again, and recommend it for its qualities and features.
4.8
12 reviews
5
11
4
0
3
1
2
0
1
0
Most Liked Positive Review
5.0
Product was exacty as descibed
product was to be delivered to a physical address, but routed to our local post office which does not deliver to our physical address (very urban). USPS did not notify me that they had the product on their shelf. I have a PO Box, but they never notified me that they had the product. It was only after my phone call to the PO that I found the product. It sat on their shelf for almost a week.
Most Liked Negative Review
3.0
I would not buy this part again.
This part was to fit my original malibu but is about 1.5" to long. Not sure where to go from here as that's why I purchased arm and steering box Togeather.
Filter by Ratings
Perfect fitment
5.0
5 months ago
Aaron
Terre haute
Verified
Fit perfectly on our stock car chassis
Would Recommend
Great fit
5.0
a year ago
Ryan
San diego
Verified
Fits great works as intended good quality
Would Recommend
so far it"s exactly what I wanted
5.0
a year ago
gramps
zimmerman, mn
Verified
perfect fit
Would Recommend
Pitman arm
5.0
2 years ago
Charlie
Alabama
Verified
It fit perfectly ..quality was good ..had no problem
Would Recommend
Pitman arm
5.0
2 years ago
EPH
Whitehall WI
Verified
Fit as it should
Would Recommend
Yes
5.0
5 years ago
Stevevo
Kansas
Verified
Fit is correct
Would Recommend
I would buy this part again.
5.0
6 years ago
Mac
Northwest,Ohio
Verified
Annual replacement
Would Recommend
just what i needed
5.0
6 years ago
none
indiana
Verified
needed modified for my app was a nice piece
Would Recommend
definitely will buy more.
5.0
7 years ago
The Dalbo Dash
Fort Leonard Wood
Verified
completes the entire new steering system - CORRECTLY!
Would Recommend
I would not buy this part again.
3.0
9 years ago
Harold017
Agnew Nebraska
Verified
This part was to fit my original malibu but is about 1.5" to long. Not sure where to go from here as that's why I purchased arm and steering box Togeather.
Would Not Recommend
Showing 10 of 12 reviews
7 Questions • 8 Answers
Does this fit Sweet 208-08210 steering box?
by Local Racer
• 4 years ago
1 answer
View Answer
Are there 2 different sized pitman arms for a 1971 Pontiac T 37? Yours lists dimensions of center to center 5.00" with hole of 1.12. I found another that measures 4.92" center to center. 5.7L manual steering
by Big_volts
• 8 years ago
2 answers
View Answers
I have 1970 Camaro that was manual steering,i installed a steering gearbox out of a 1990 camaro. Bolted right in steering coupler matched right up as well. would this pitman arm work w/this application? Thanks for any feedback!
by SteveZ28
• 8 years ago
1 answer
View Answer
Does this fit the 605 manual steering boxes?
by Chevytruck
• 10 years ago
1 answer
View Answer
hey there, is this thing cast or forged please? thankyou
by ben
• 10 years ago
1 answer
View Answer
what is the taper and size of the ball joint that fits this need it for a conversion to jeep drag link
by Mel
• 10 years ago
1 answer
View Answer
Will this product work with the B-body olds, 1968 Delmont 88?
by Dave the great
• 11 years ago
1 answer
View Answer
7 of 7 questions shown
1968-1972 Buick Skylark
1968-1969 Buick Special
1968-1972 Chevy Caprice
1968-1972 Chevy Chevelle
1968-1972 Chevy El Camino
1970-1972 Chevy Monte Carlo
1966-1971 Oldsmobile 442
1966-1972 Oldsmobile Cutlass
1966-1972 Oldsmobile F85
1966-1972 Oldsmobile Vista Cruiser
1964-1972 Pontiac Grand Prix
1964-1972 Pontiac GTO
1964-1972 Pontiac LeMans
1964-1970 Pontiac Tempest
