|
#9163328
$48.99
/set
In Stock
$49.96
Save $0.97
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
48-54 Ford, 57-60 Ford
Comes as a Kit
View Kit Components
Need help?
855.313.9176Quick and Easy Returns
Return PolicyAnytime you remove a leaf spring U-bolt, you should replace it. Once they have been tightened and stretch, they have lost their strength. These U-bolts are designed to be used with stock 2" wide front Ford half-ton multi-leaf springs.
Bolts have 9/16" rolled threads and include flat washers and nylock nuts.
Specs
Guides & Documents
| KEY SPECS | |
|---|---|
| MFG. Part # | 9163328 |
| Brand | Speedway Motors |
4
9 Reviews
Customers appreciate the affordable, high-quality product for their restoration projects, confirming its exact fit and usability. However, some buyers noted the U-bolts were too long and not threaded far enough, requiring slight modifications. Despite these minor issues, customers felt the part was correct and functional for their trucks, and would purchase again. In comparison to other companies, customers continue to prefer our parts for their outstanding quality.
4
9 reviews
5
5
4
1
3
2
2
0
1
1
Filter by Ratings
Parts received where as described
5.0
2 years ago
Carchaeology1228
Auburn CA
Verified
Great value, parts arrived as described on the site. Quality of the items was good and it was nice to have a torque spec sheet included.
Would Recommend
Great price and outstanding quality
5.0
4 years ago
Shop Doc
Las Cruces
Verified
Restoring a 1960 F-100, put all new suspension under it and with new springs I like new u-bolts. Fit like a glove.
Would Recommend
Exact Fit
5.0
6 years ago
Super Dave
Riverside, CA
Verified
The U-bolts fit as expected.
Would Recommend
Not quite a direct fit.
3.0
8 years ago
Erock
Missouri
Verified
These bolts were the right diameter and width that I needed and that was described. However, the treads were not cut up far enough on the bolts so I had to make spacers in order to use them and cut the rest of the bolts of because they were very long. All of this is not a super big deal and I made it work but I expected them to fit perfectly without modifications in my stock setup that matches the description.
Would Recommend
I would buy again
5.0
8 years ago
Chris
Jacksonville, FL
Verified
Was the correct part for the truck
Would Recommend
Yes I would buy this product again
5.0
9 years ago
Phil
Connecticut
Verified
Received just what I needed.
Would Recommend
too long
3.0
9 years ago
werd
ill.
Verified
only ones listed for this 4x2 1/2 ton truck, but are approx. 2" too long and not threaded far enough to use. Have always had great satisfaction with Speedway parts - till this - but still a great company to do business with.
Would Not Recommend
BEWARE-NEEDS RETHREADING FOR 60 F100
1.0
11 years ago
RUDY
DFW
Verified
THE U-BOLTS THREAD WAS NOT FAR ENOUGH TO WORK. DID NOT WORK AND USED ORIGINAL U-BOLTS DUE TO NOT HAVING THE TOOLS TO RETHREAD U-BOLT.
Would Not Recommend
it did what i needed
4.0
13 years ago
wildtide
Texas, USA
Verified
The threads need to be longer cut,i had to cut a one inch spacer to go under it ,to use it.then chop half of it off.other than that it works.
Would Recommend
Showing 9 of 9 reviews
1 Question • 1 Answer
There are three reviews that all say the threads are not cut long enough. What is the thread length?
by Nick
• 9 years ago
1 answer
View Answer
1 of 1 questions shown
1953-1960 Ford F-100
1948-1952 Ford F1
