|
#9100548
$84.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
48-54 Ford, Aluminum, Polished, 5 Gauge Quantity
Need help?
855.313.9176Quick and Easy Returns
Return PolicySurround your modern aftermarket gauges with this beautifully polished billet aluminum dash panel. It's easy and affordable to upgrade your 1948-50 Ford truck with modern instruments using this 5 gauge panel. This panel works with most aftermarket gauges and accepts a 3-3/8" speedometer and 2.09"auxillary gauges.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 9100548 |
| Brand | Speedway Motors |
| Material Type | Aluminum |
| Finish | Polished |
| GENERAL | |
| Speedometer Hole Diameter | 3.4" |
| Auxiliary Gauge Hole Diameter | 2.09" |
| Gauge Quantity | 5 |
| Overall Width | 11.38" |
| Overall Height | 4.75" |
| Overall Thickness | .38" |
| Sold in Quantity | Each |
| Notes | Accepts 5/32" LED bulbs. |
4.5
11 Reviews
The product, a gauge dash panel, is praised for its good design, quality, and appealing finish. Customers report that it is a durable and practical instrument replacement. However, certain adjustments like grinding or drilling may be necessary for fitting as some users noticed this was not an exact fit. The gauges are reported to fit well and once installed, the panel looks good and flush. It's a favored choice for standard gauge conversions. Despite the required work for fitment, the product is recommended by users for its overall function and aesthetics.
4.4
11 reviews
5
6
4
4
3
1
2
0
1
0
Most Liked Positive Review
4.0
Expect no drop in fit.
I had to do considerable hammer work to the dash opening in my 1950 Ford truck to get this panel to fit the opening. Also, there was a set of aluminum brackets included that had no function for my install.
Most Liked Negative Review
3.0
be prepared to grind and grind some more
I have seen several reviews where it says small amount of grinding. That may be true if you want to grind your dash, but if you grind the dash panel to fit it will take work and test Fits then more grinding. Then if you just happen to slip with grinder, you will have to sand out scratches and polish. Regardless, other reviewers definition of minor grinding and mine are obviously different. This dash panel will work and does look good, but it takes work and patience to make fit properly. Gauges do fit well. You will have to fabricate mounting brackets and drill and tap holes in panel or simply grind to a pressure fit situation.
Filter by Ratings
be prepared to grind and grind some more
3.0
3 years ago
cg
Oklahoma
I have seen several reviews where it says small amount of grinding. That may be true if you want to grind your dash, but if you grind the dash panel to fit it will take work and test Fits then more grinding. Then if you just happen to slip with grinder, you will have to sand out scratches and polish. Regardless, other reviewers definition of minor grinding and mine are obviously different. This dash panel will work and does look good, but it takes work and patience to make fit properly. Gauges do fit well. You will have to fabricate mounting brackets and drill and tap holes in panel or simply grind to a pressure fit situation.
Would Not Recommend
great piece
5.0
6 years ago
Leviwon
Monterey, Ca
Verified
fit and finish are great
Would Recommend
I am pleased with your products, and will continue to shop .
5.0
6 years ago
Lou
Tillamook, Oregon
Verified
Excellent quality, nice design can't wait to see it installed. The price was fair too.
Would Recommend
5 gauge dash panel
5.0
7 years ago
gary
Sonoma CA
Verified
The panel takes the place of the stock instrument frame and dash panel. The panel fits, with some small grinding and adjustment to the existing anchor points, into the existing dash panel hole. It fits flush and looks good. I had to move and re-weld an existing anchor point to make the panel fit a little tighter. I like it a lot.
Would Recommend
i would recommend this dash
5.0
8 years ago
aka
winter haven fl.
Verified
thsi is top of the line
Would Recommend
Looks great
4.0
8 years ago
Caddeaux
deridder,la
Verified
not an exact fit, takes some grinding
Would Recommend
very nice
4.0
9 years ago
Paul
Sutherlin Oregon
Verified
Very nice pice but I have to enlarge the hole in my dash to make it fit I understand that the stamping process back in 1949 wasn't precise . But all an all pretty good option if converting to standard gauges
Would Recommend
perfect fit
4.0
9 years ago
F1
Southern Oregon
Verified
exact fit
Would Recommend
Just what I needed. Well made
5.0
9 years ago
Gary
Brule Wisconsin
Verified
Needed a gauge panel for my 1950 F-1 it was a perfect fit
Would Recommend
Great Panel
5.0
10 years ago
RustisaMust
Scarborough, Ontario
Verified
Well designed piece.
Would Recommend
Showing 10 of 11 reviews
1 Question • 1 Answer
Will the Classic gauges Cw26slf-d the fuel , oil temp, and volts fit?
by dennis
• 10 years ago
1 answer
View Answer
1 of 1 questions shown
1953-1954 Ford F-100
1948-1952 Ford F1
1948-1950 Ford F2
1948-1950 Ford F3
1948-1950 Ford F4
