Speedway 1928-34 Ford 4-Bar Front Panhard Bars

#91049801

Speedway 1928-34 Ford 4-Bar Front Panhard Bars

Name: Speedway 1928-34 Ford 4-Bar Front Panhard Bars
Brand: Speedway Motors
SKU: 91049801
Rating: 4.8 (31 reviews)

31 Reviews

11 Questions

With cross steering a Panhard bar is a must-have item due to the added side for applied by the steering linkage
This kit will stop side-to-side sway of chassis relative to the axle
Designed for spring over 4 bar front ends with I beam axle

Finish:

Select a finish

Starting from

$91.99

/each

In Stock

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

25.00" Tube Length, 27.50" Center to Center, Steel

With cross steering a Panhard bar is a must-have item due to the added side for applied by the steering linkage
This kit will stop side-to-side sway of chassis relative to the axle
Designed for spring over 4 bar front ends with I beam axle
Chassis bracket will need to be welded to your frame
Choose from raw steel or polished stainless steel components

See more details

Key Specs

Tube Length	25.00"
Thread Pitch	1/2"-20
Hole Diameter	.50"
Material Type	Steel
Finish	Select Finish

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Details

With cross steering a Panhard bar is a must-have. It stops side-to-side sway of chassis relative to the axle. This bar is for spring-over-axle, 4-bar front ends on 1928-1934 Fords. Tube O.D. is 5/8".

11/16" outside diameter
1/2" inside diameter
1/2" bolt
1/2" heim

Chassis bracket welds-on, then bar bolts in place to the side of the 4-bar batwing. Panhard bar bracket mounts to a batwing that features a 4-1/2" on center four-bar spacing.

Item Details

'Fits 4-bar front suspensions on ''28-''34 Ford.'

Specs

Guides & Documents

Track Bars Installation Instructions (91049801)

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

Specifications

KEY SPECS
MFG. Part #	Select Finish to see
Brand	Speedway Motors
Tube Length	25.00"
Thread Pitch	1/2"-20
Hole Diameter	.50"
Material Type	Steel
Finish	Select Finish to see
Color	Black

GENERAL
Center to Center	27.50"
Tube O.D.	.63"
Notes	1/2" Heim, bolt hole spacing for batwing bracket is 4.5" on center.
Sold in Quantity	Kit
Hardware Included	Yes
Rod Ends Included	Yes

Ratings & Reviews

4.8

31 Reviews

Overall Assessment

Customers highly praise the product for its quality, functionality, and adjustability. Many found the item to be "well-made, heavy-duty," and "easy to install," characterising it as a practical solution with a "good fit and finish." The product also earns recommendations for custom builds, with users complimenting its polished stainless design and its aptness for models like the '32 and '34 Ford, amongst others. In comparison to competitors, the product stands out for its robustness and efficacy in resolving oversteer problems and improving driving experiences. Further, users appreciate its aesthetic and professional look, making it a desired addition to their projects.

Write A Review

4.8

31 reviews

Most Liked Positive Review

5.0

Great product

Bought this pan hard bar to go with my 4 inch drop axle using the batwing brackets from speedway and the 4 bar setup from speedway also. The bar comes with everything you need to install and requires a little welding which is simple for a guy with the proper skills. Also comes with instructions as how to place the brackets and assemble the bar. Great buy for my hot rod project.

Most Liked Negative Review

3.0

Nice part but had to modify

Had to hog out the holes both ways (up and down) in order to bolt on to the batwing mount.

Filter by Ratings

Sort Reviews

Nice item

5.0

a month ago

Louis

Mexico

Verified

I will Buy it Again

Would Recommend

NICE SOLID KIT

5.0

9 months ago

MODEL 396A

GREENWOOD SC

Verified

USED ON MY 31 MODEL A SEDAN WITH A 32 FORD HIGHBOY FRAME, LOOKS NICE AND WAS A GREAT PRICE

Would Recommend

This part is great

5.0

a year ago

Ricky racer

Arvada colorado

Verified

Came with everything you need and mounts easy looking great

Would Recommend

Nice part but had to modify

3.0

2 years ago

Mr. G

Middletown NY

Verified

Had to hog out the holes both ways (up and down) in order to bolt on to the batwing mount.

Would Recommend

I would buy it again

4.0

3 years ago

Mr fix it

Ft. Lupton, Co.

Verified

It's easier to cut down than add to it.

Would Recommend

Worked well at reasonable price

5.0

3 years ago

T Bucket Dave

Yorkville, Illinois

Verified

Used on 27 T roadster with tube straight axel. The car was being coverted to custom air ride. The look of the buggy spring was kept so as to look stock. Had to modifiy to clear air bags. Still worked as planned.

Would Recommend

1931 Model A 5 window coupe

5.0

4 years ago

Fast John

Orlando Fl.

Verified

I would like very much to rate this product, but as I stated in the last review I can't give a honest rating or opinion . Because it is still sitting in the box it was shipped, along with the rest of the $1583, of drop axle components that were shipped on March 7. But you can't complete or start the front end without the main component-- the axle.

Would Recommend

yes would buy again

5.0

4 years ago

tommy t

flemington n.j.

Verified

just starting my 32 frame this front pan bar is just what I needed

Would Recommend

i would buy this product again

5.0

5 years ago

wabbit

napa Ca

Verified

I have yet to install this product but it is well made and I'm sure it will work fine.

Would Recommend

buy it

5.0

5 years ago

stroker from the big D

riverview,mi

Verified

Great product to help cure bump steer on cross steering hot rod suspensions. Well made and heavy duty pieces for a safe install and ride.

Would Recommend

Load More Reviews

Showing 10 of 31 reviews

Questions & Answers

11 Questions • 11 Answers

Sort Questions

Can I purchase just the weld on frame bracket? I don't need the whole setup just the one piece as I'm using hairpins instead of the four bar setup. I've already made a custom bracket for the hairpin side and have tubing already and ends, would just like to purchase the bracket.

by Johnnythehat

• 8 years ago

1 answer

View Answer

Do you sale only the bar, ends, and hardware? I don't need the brackets. This is for the Polished Stainless Steel Option.

by KEVIN

• 9 years ago

1 answer

View Answer

will I have to do any modifications to fit the 4 bars inside of the bat wings with this bracket on the inside of the batwing.

by Dave

• 9 years ago

2 answers

View Answers

what is the max. adjustment that you can adjust the heim to get the most length??? You said the eye to eye was 27.5 inches can you get say another 2 inches?? Thanks Ron

by Ron

• 9 years ago

1 answer

View Answer

Will this panhard bracket bolt up to your part #916-35000 radius rod bracket? I want to add a panhard to my Hairpin assembly since it is recommended for cross steering. I will be adding it to your Model A chassis kit I purchased. If not is there an alternative? Thanks

by Tim

• 10 years ago

1 answer

View Answer

I would like to buy a spare rod end for this kit. Could you say me which is the rod end PN used in this kit?

by Nagy

• 10 years ago

1 answer

View Answer

Does the bat wing bracket go on the bat wing? or does it replace the bat wing?

by Echo

• 11 years ago

1 answer

View Answer

What does polish mean? Is this stainless or chrome?

by Just Bob

• 11 years ago

1 answer

View Answer

Your "Jason" replied to another question about total eye-to-eye length. He said 25". Your spec box on this page says tube length 25", and eye-to-eye is 27.5". Which is correct eye-to-eye - 25" or 27.5"?

by Bluedot

• 11 years ago

1 answer

View Answer

Polished Does the polished kit come with a polished mounting bracket?

by RyanL

• 12 years ago

1 answer

View Answer

Load More Questions

10 of 11 questions shown