|
#91102215
$57.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 23.00 fl. oz. Capacity, 0.25" Tube O.D.
| MFG. Part # | 91102215 |
| Capacity | 23.00 fl. oz. |
| Overall Diameter | 2" |
| Material Type | Stainless Steel |
| Finish | Polished |
Need help?
855.313.9176Quick and Easy Returns
Return Policy2" outside diameter, 1⁄4" O.D. nipples - works with any radiator. Stops loss of coolant and prevents pulling air into system when cooling off. Polished stainless steel expansion reservoir tank with screw-off cap.
Charts
911-02215 Instructions (PDF)
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91102215 |
| Brand | Speedway Motors |
| Capacity | 23.00 fl. oz. |
| Overall Diameter | 2" |
| Material Type | Stainless Steel |
| Finish | Polished |
| GENERAL | |
| Overall Height | 15.00" |
| Cap Diameter | 1.60" |
| Tube O.D. | 0.25" |
| Filler Neck Height | 0.50" |
| Centerline of Holes | 9.38" |
| Flange Width | 1.50" |
| Slot Length | .50" |
| Slot Width | .25" |
| Mounting Plate Length | 1.50" |
| Mounting Plate Width | 1.00" |
| Hardware Included | Yes |
| Sold in Quantity | Each |
| Notes | Includes mounting tabs. This tank is not designed to be pressurized. Short tube is radiator overflow hose, long tube is for venting tank. CAP 1-1/4-18 THREAD |
4.9
61 Reviews
Customers have consistently praised the product for its excellent quality, practicality, and easy installation. They've also highlighted its perfect fit and functionality, solving radiator leak issues without standing out or affecting the vehicle's aesthetic. The product's build quality and materials, including its bright chrome finish and knurled cap, have been frequently praised, with some customers noting that they've purchased multiple units for different builds. The product's price point also received notable commendation, with many considering it a great value. Customers expressly recommended the product due to its superior quality and cost-effectiveness compared to other brands. Despite minor concerns about the included mounting hardware, customers still consider the product an excellent buy.
4.9
61 reviews
5
54
4
6
3
1
2
0
1
0
Most Liked Positive Review
4.0
Very nice product, excellent value.
This is a great looking and functional addition to my engine compartment, which now actually looks better after installing this product. The only reason I gave it four stars instead of five is because after the manufacturer spent considerable effort on the design and fit and finish, which is exquisite, the two tubes exiting the bottom of the cylinder were installed crooked and bending them straight would likely result in leakage. What a shame to build such a nice product but neglect to pay attention to a final detail.
Most Liked Negative Review
3.0
bad choice
The tank is nice, but it is 1" too long. [...] Looks like my best bet is to buy one locally.
Filter by Ratings
I would buy again
5.0
7 months ago
29 Ford
Wichita Ks
Verified
Works great, looks great. Model A Ford
Would Recommend
If needed, I would this produce again.
5.0
10 months ago
Normal Joe
Dallas, TX
Verified
Put the overflow contaminant my 68 GT500
Would Recommend
Nice piece
5.0
a year ago
Dick
Hudson by.
Verified
All the stainless mount. Hardware came with it
Would Recommend
Keeps my garage floor free from EGW
5.0
2 years ago
Mark
Annapolis, Maryland
Verified
Fits well beside my radiator and looks good
Would Recommend
Works well - Easy install
4.0
3 years ago
Red
Kansas
Verified
The mounting bracket spacing is a perfect match for the stock shroud mounting bolts (1966 C10). The tank is a good size and shape to contain the overflow when needed. I try to buy domestic products, but this was the only thing that I found to do the job simply and not stand out too much for a C 10 survivor.
Would Recommend
Excellent parts....would buy again !
5.0
4 years ago
Sid
Louisiana
Verified
Looks good and works
Well made.
5.0
4 years ago
Decky69
Leland NC
Verified
Mounted to the radiator support with fabricated bracket.
Would Recommend
Yes
5.0
4 years ago
DannyB
Maine
Verified
Just the right size
Would Recommend
This is the 3rd one I purchased love them!
5.0
4 years ago
Orde's Ford's
Sheboygan,Wi.
Verified
Worked out great on my 66 Bronco Roadster!
Would Recommend
for sure
5.0
4 years ago
Gavin
british columbia canada
Verified
good quality for what im paying
Showing 10 of 61 reviews
5 Questions • 6 Answers
ow far are mounting bracket holes on the tank apart...center to center ??
by Brian
• 4 years ago
1 answer
View Answer
How and where do you install on 1970 chevelle?
by Tom
• 10 years ago
1 answer
View Answer
which bottom tube goes to the radiator and which one is the drain
by hotrod29
• 11 years ago
1 answer
View Answer
can you buy only the cap on the expansion tank
by 1976
• 13 years ago
1 answer
View Answer
DOES THIS PRODUCT INCLUDE ALL OF THE HARDWARE AND BRACKETS TO INSTALL?
by
• 15 years ago
2 answers
View Answers
5 of 5 questions shown
