|
#91121001
$52.99
/kit
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Bulb Headlight Component
| MFG. Part # | 91121001 |
| Brand | Speedway Motors |
| Bulb Type | Halogen |
| Turn Signals Included | No |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyAre you wanting to run a set of vintage headlights on your car or truck, but are wondering how to make them work again? This kit will solve the problem! Simply remove the existing socket from the reflector and drill out the hole to 1" in diameter. Then install the new 12 volt H-4 quartz halogen bulb into your reflector and secure it with the included press nut and retainer clip. After wiring up the new connectors, you'll be ready to ride.
Kit includes 2 halogen bulbs, 2 bulb adaptors, hardware and instructions. Fits most stock headlights.
Charts
911-21001 Instructions (PDF)
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91121001 |
| Brand | Speedway Motors |
| Bulb Type | Halogen |
| Turn Signals Included | No |
| GENERAL | |
| Headlight Component | Bulb |
| OEM Replacement | No |
| Position | Driver and Passenger Side |
| Voltage | 12 volts |
| Hole Diameter | 1" |
| Hardware Included | Yes |
| Sold in Quantity | Kit |
4.3
46 Reviews
Customers appreciate this headlight conversion kit for its simplicity and the improved visibility it provides. Several reviews highlighted the kit's ability to modernize, while maintaining the original look of vehicles like the 1929 Ford model A and 1936 Chevy Standard Coupe. The installation process is generally described as easy. However, some customers find the fasteners unsatisfactory and opted to secure the bulb socket with sheet metal screws, indicating a possibility for product improvement. Despite this, most customers found alternative solutions, showing a high level of satisfaction with the product's performance. This kit is a preferred choice for those wanting to upgrade their original headlights to halogen bulbs.
4.4
46 reviews
5
27
4
11
3
5
2
3
1
0
Most Liked Positive Review
4.0
1930-1931 Chevy Headlights Read then decide.
Used to replace standard 32-50w 12v bulbs in '30-'31 Chevy headlights on ratrod. The "flange" that the press nut mounts to on the backside is a little short due to the flat base on the socket seat...since reflector is concave/curved mine didn't come out the backside enough to easily press on nut. Took some persuading and ingenuity to get mine on without damaging the reflector...then, when I got the nut on, it had "tweaked" the socket seat and made it near to impossible to get light bulb to install. The base needs to be the same shape as the press nut...at least for '30-'31 Chevy headlights...I'm sure all reflectors are not the same shape and may work better for other models. The instructions didn't state how to "clock" the bulb socket(unless I missed it)...low beam throws only to 1 side or half of the light...I mention that because if yours fits as tight as mine, you'll have trouble "clocking" it after install...and I'm using a painted reflector so it mattered. *Take the advice from another reviewer and use the proper hole drilling tool to enlarge the reflector hole...if you're not familiar with drilling thin metal. 1 month since install and all is well.
Most Liked Negative Review
3.0
I would purchase this product again
I needed to upgrade the headlights on my 1936 Chevy Standard Coupe. This halogen conversion kit seemed like just the ticket. I was not happy with the fasteners that were supposed to hold the bulb socket to the back of the reflector. there was no way they would have worked, but by drilling two small holes and using sheet metal screws I attached the socket to the reflector for a nice secure installation.
Filter by Ratings
I'm disappointed in the quality of the sockets.
3.0
4 months ago
GJ
Missouri
Verified
Ultimately I made them work, sockets are flimsy and too short for the retainer ring. Will look for an alternative on my next build.
Would Not Recommend
Worked great
5.0
6 months ago
Rat Rod Relics
Saginaw MI
Verified
Used on our Model A project. Worked great.
Would Recommend
Great kit seems to be multi fit!
5.0
11 months ago
Pat
Calgary, Alberta, Canada
Verified
Perfect install with minimal mods to original parts
Would Recommend
yes
5.0
a year ago
12amrider
tacoma wa.
Verified
assembled the headlights parts fit good
Would Recommend
Probably would buy something else next time
3.0
a year ago
Dan
Nebraska
Verified
The design of the piece that holds the bulb and the ring that holds it is not very good I was unable to get the pieces to stay together but I finally settled on flaring out the metal where the retaining ring was supposed to lock on and hammering it flat to hold the socket in place overall it ended up working ok but nowhere near the way it was intended
Worked ok
4.0
a year ago
Td
Nebraska
Verified
Seems to be a little dim on low beams
Would Recommend
Perfect headlight upgrade to your hotrod
5.0
2 years ago
Bombers Speed Co
Kentucky
Verified
Perfect upgrade to those old headlights without giving it a modern look.
Would Recommend
Fit problems with light socket.
3.0
2 years ago
Boosquat
Clemson SC
Verified
The conversion socket looks like it is well designed and would work well with a different type of headlight bulb.
Would Recommend
Great product!!!
5.0
2 years ago
Boosquat
Clemson SC
Verified
Easy to adapt to my old driving lights.
Would Recommend
I would use this product again
3.0
2 years ago
Dave
Morris mn
Verified
It's an easy install for the socket. Difficult to latch the bulbs in place.
Would Recommend
Showing 10 of 46 reviews
5 Questions • 6 Answers
Does this conversion require adding a relay and/or a different light switch?
by Ross
• 7 years ago
1 answer
View Answer
I have a 1948 Fi Ford pickup and want to install quartz halogen hedlights. The truck is already 12volt. How much of a hassle is it to convert?
by rock
• 9 years ago
2 answers
View Answers
Will The Halogen conversion kit work with the LED turn signal indicator?
by Al B
• 9 years ago
1 answer
View Answer
Can I get this product in 6-volt
by blinddriver
• 12 years ago
1 answer
View Answer
headlight conversion will this kit work in a 1934 chevrolet truck orignal headlamp, with the orignal reflector it also has two holes in the reflector, one for orignal headlight bulb, the other for parking lamp bulb
by zips
• 13 years ago
1 answer
View Answer
5 of 5 questions shown
