|
#91634-999
Speedway 11/16 Inch Raw Tie Rod/Drag Link Tubing
- Supplied in a plain steel finish
- Threaded for 11/16"-18 RH and LH tie rod ends
- Each sleeve has RH thread in one end, and LH thread in the other to allow for easy adjustment
$92.99
/each
Made to Order
This is a custom fabricated part. We estimate this item will ship on or before October 5th.
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
11/16"-18 Thread Pitch, Steel, Natural
- Supplied in a plain steel finish
- Threaded for 11/16"-18 RH and LH tie rod ends
- Each sleeve has RH thread in one end, and LH thread in the other to allow for easy adjustment
- Custom length; please specify your desired assembled eye-to-eye length in the note field when placing your order
- Actual length of sleeve will be 3-1/2" less than desired eye-to-eye length to allow for rod ends
Need To Know
Made to Order
This custom item will ship when completed
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91634-999 Details
Speedway Motors 91634-999 Details
If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths.
To order:
- Use guide below to measure your finished length.
- The part number and length you order will be 3-1/2" shorter than the sleeve you receive. (I.E., if you order a 48" part number, you will receive a 44-1/2" long sleeve.) This is the difference in length required to give you the correct finished center-to-center measurement.
- All sleeves will have internal RH thread in one end and LH thread in the other.
Item Details
NOTE: Specify eye-to-eye length in Comments section of your Shopping Cart.
Charts
Guides & Documents
Speedway Motors 91634-999 Specifications
Speedway Motors 91634-999 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91634-999 |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Natural |
| GENERAL | |
| Thread Pitch | 11/16"-18 |
| Sold in Quantity | Each |
Ratings & Reviews
5
6 Reviews
Customers found the product to be perfect for various models, like the 1967 Dodge D100 and 1965 Dodge D200. Its practicality was praised for fitting perfectly, especially after modifications like replacing a steering box. The product's size accuracy was also confirmed. Despite the cost being high for certain sizes, customers indicated they would revisit it for its quality and performance, like for completing cross steer conversions on a 32 Ford. The product's distinct features and effectiveness set it apart from other options in the market.
Ratings & Reviews
5
6 Reviews
Customers found the product to be perfect for various models, like the 1967 Dodge D100 and 1965 Dodge D200. Its practicality was praised for fitting perfectly, especially after modifications like replacing a steering box. The product's size accuracy was also confirmed. Despite the cost being high for certain sizes, customers indicated they would revisit it for its quality and performance, like for completing cross steer conversions on a 32 Ford. The product's distinct features and effectiveness set it apart from other options in the market.
5
6 reviews
5
6
4
0
3
0
2
0
1
0
Filter by Ratings
CUSTOM LENGTH 31 INCHES PERFECT
5.0
a month ago
GREEN MONKEYMAN
GREENWOOD SC
Verified
USING AS DRAGLINK ON MY 31 FORD ON A 32 FRAME, PERFECT CUSTOM LENGTH!!
Would Recommend
Yes
5.0
3 years ago
Turd shop
Clinton Iowa
Verified
Worked perfect on my 1967 Dodge d100
Would Recommend
It fit perfectly.
5.0
3 years ago
Don't have one.
Glen Cove NY
Verified
Since I replaced my steering box I needed a longer drag link.
Would Recommend
Yes
5.0
4 years ago
Tom
Colorado
Verified
I used this on my 1965 dodge D200
Would Recommend
the size ordered was right on and worked perfect.
5.0
5 years ago
Tinhead
in the sticks , MO
Verified
wish they had more sizes available in the pre cut list of the other part # . I payed $30 for a 48" powder coated and that 19" raw cost over $75 . that's life .
Would Recommend
I would buy again as needed
5.0
5 years ago
Old
Love Joy Butte Ca.
Verified
This is to complete the cross steer conversion on my 32 Ford. It fits !!
Would Recommend
Showing 6 of 6 reviews
Questions & Answers
Questions & Answers
Be the first to ask a question.