|
#91082160
$16.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
14.00" Overall Length, Steel, Zinc Plated
Need help?
855.313.9176Quick and Easy Returns
Return PolicyCA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91082160 |
| Brand | Speedway Motors |
| GENERAL | |
| Overall Length | 14.00" |
| Material Type | Steel |
| Finish | Zinc Plated |
| Sold in Quantity | Each |
| Notes | 1-15/16" across the flats on the opening. |
4.6
16 Reviews
Customers positively reviewed the product for its usefulness in installing and removing ball joints. The wrench is often referred to as well-made, durable, and of good value for its cost. Despite some complaints about the handle being a bit hard on the hand, users recommend it for those needing to work on screw-in Chrysler ball joints, emphasizing its efficiency and the convenience it offers in tight spaces. The product performs as intended, successfully setting itself apart with its practicality and solidity. It also provides a safer alternative to conventional wrenches by protecting users from potential injuries. Despite its simplicity, it meets users expectations and is deemed a necessary tool in its field by many customers.
4.6
16 reviews
5
10
4
5
3
1
2
0
1
0
Most Liked Positive Review
4.0
Spanner wrench
Anyone who runs the screw-in Chrysler ball joints should have one or two of these. Ordered this one so we'd always have one in the trailer and one in the shop. It's a little thin and hard on the hand but much easier than trying to get a conventional wrench in what's usually a very limited space
Most Liked Negative Review
3.0
Ball joint wrench
Does the job, nothing fancy here. Handle is thin so if you have to get after it on a old ball joint it might be uncomfortable. Works like it should though. Now if they just made one for the big ball joints....
Filter by Ratings
Only need one
5.0
a year ago
Him
Dexter ks
Verified
It works
This wrench will install your screw in ball joints.
5.0
4 years ago
Rod
Gretna, NE
Verified
Price was reasonable, quality good, shipping prompt. It works. what more can be said?
Would Recommend
works well
5.0
6 years ago
40 coupe
McHenry Illinois
Verified
the tool made installing the ball joint easy
Would Recommend
Works as it should
5.0
6 years ago
AlexL
Broomfield, CO
Verified
Works perfect, as intended to use to remove a screw in style ball joint.
Would Recommend
Not perfect
4.0
7 years ago
Russ
Glendale Az
Verified
Works good if the ball joint/control arm meshes well. Any glitch and not so good. OK for the price.
Would Recommend
Well made, heavy guage.
5.0
8 years ago
Nytro
Uniontown, Ohio
Verified
Well made, heavy guage.
Would Recommend
Spanner wrench
4.0
10 years ago
me
Auburn, CA
Verified
Anyone who runs the screw-in Chrysler ball joints should have one or two of these. Ordered this one so we'd always have one in the trailer and one in the shop. It's a little thin and hard on the hand but much easier than trying to get a conventional wrench in what's usually a very limited space
Would Recommend
Work like a charm
5.0
10 years ago
Buffalo Rick
Phoenix, AZ
Verified
No more busted knuckles!
Would Recommend
worked just as advertised
5.0
11 years ago
clipper
crestline ohio
Verified
needed to take the ball joints out so the control armes could be powder coated put them in just as well
Would Recommend
Spanner Wrench
5.0
12 years ago
Vairmech
Fowlerville, MI 48836, USA
Verified
This is a sheet steel spanner wrench but gets the job done. You couldn't spend the time to make one for the cost.
Would Recommend
Showing 10 of 16 reviews
Be the first to ask a question.
1962-1971 Chrysler 300
1975-1983 Chrysler Cordoba
1983-1989 Chrysler Fifth Avenue
1981-1983 Chrysler Imperial
1977-1981 Chrysler LeBaron
1963-1982 Chrysler New Yorker
1961-1981 Chrysler Newport
1958-1961 Chrysler Windsor
1963-1964 Dodge 330
1963-1964 Dodge 440
1963-1964 Dodge 880
1964 Dodge A100
1976-1980 Dodge Aspen
1970-1974 Dodge Challenger
1966-1978 Dodge Charger
