Side Detent Cable Floor Shifter for GM Powerglide Transmission

This is Garage Sale priced due to cosmetic imperfections. The item functions as originally intended but is discounted due to the blemishes. The photos above will show the imperfections. THIS PART IS SCUFFED.

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

• For later model GM Aluminum Powerglide transmissions, NOT the early GM Cast Iron Powerglide transmissions
• Floor mount design requires a single 1" hole for cable pass through
• 2-bolt shift lever stub with 7/8" center-to-center spacing and 3/8"-16 threads
• Accepts standard 2-bolt manual transmission shifter lever of your choice (NOT included)
• Positive detents ensure that you won't over-run 2nd gear
• Reverse lockout detent
• Integrated neutral safety & back-up light switches on shifter body
• Plastic trim plate, shift boot, and chrome shifter bezel for a finished look in any interior

Shift Your Ride with Ease 

Drag racers and muscle car fans have been utilizing GM’s famous Powerglide two-speed automatic transmission in their builds for decades, and with good reason, they are simple transmissions that can take great amounts of power. The aftermarket offers all manner of rebuild and performance upgrades for these transmissions as well, making their use even more prolific. We have built this universal floor-mount Powerglide shifter model specifically for this application with transmission specific cable mounting bracket and linkage. We maintained all the features we originally designed into the GM three-speed automatic shifter version first released in 2020, to get you on the road quickly and at a great value! 

Built to Take Every Shift 

Our new Side Detent Shifter works with the later model of GM Aluminum Powerglide transmissions, not the early GM Cast Iron Powerglide transmissions. The Powerglide shifter assembly is made from steel to take years of abuse and features a robust reverse lockout system to prevent inadvertent shifter movement into reverse during spirited manual shift driving. Positive shift position detents provide feedback confirmation as to what gear position you are in while preventing you from over-running 2nd gear. We have included both a neutral safety switch and reverse light switch right on the shifter body that can be easily wired into stock wiring or any aftermarket wire harness solution. The shifter lever has been crafted with a 7/8-inch center to center spacing using 3/8-16 threaded holes to mount any two-bolt manual shift lever of your choice (shift lever and knob not included). The provided five-foot shifter cable allows multiple routing choices to clear exhaust and vehicle crossmembers, while the included cable mounting bracket attaches cleanly to your Powerglide transmission, tucking the cable in nice and tight to the transmission for maximum clearances. 

Simple Bolt-On Solution 

Our Side Detent Shifter is the perfect solution for your GM Powerglide transmission-equipped project and mounts solidly to your transmission tunnel with the included hardware. Simply locate the shifter assembly, noting dash and seating constraints for your shift lever of choice, and drill four 5/16-inch holes to secure the shifter assembly in place. An additional 1-inch hole will need to be drilled for shifter cable pass through to route the shifter cable from the shifter to the transmission. The included vacuum-formed ABS plastic top cover provides a finished look to the Powerglide shifter and is easily trimmed to match the contours of your transmission tunnel. A chrome-plated steel trim ring and a stitched black vinyl multi-panel shift boot finishes off the installation for a classic appearance. The top cover can even be fitted under your carpet if you choose so that only the trim ring and shift boot/lever are above the carpet for a near “factory” look.

Complete Shifter Kit Includes:

• Powerglide shifter unit
• ABS plastic top cover
• Black vinyl stitched boot
• Chrome-plated steel base ring
  • 6.75" x 5.25" rectangular frame
  • Stainless steel mounting screws
• 5ft long shift cable
• Neutral switch/backup light switch
• All related hardware

This will directly fit the later model of GM Aluminum Powerglide transmissions, not the early GM Cast Iron Powerglide transmissions.