SBC Ready-to-Run Ignition/Fuel Delivery Kit-80 GPH Pump,6AN,Black

Breathe new life into your Small Block Chevy engine with this complete distributor ignition/fuel delivery kit!

Kit Includes:

• (1) Speedway Motors Ready to Run Pro Billet Distributor, Chevy V8
• (1) PerTronix 40011 Flame-Thrower Coil, Black
• (1) MSD 5554 Street-Fire Spark Plug Wires Set, Small Block Chevy 350 HEI
• (1) PerTronix 10001 Coil Bracket, Zinc Clear
• (1) Chevy Small Block V8 Mechanical Fuel Pump, 80 GPH, Black
• (1) Fuel Log, 4150 Style Carb, AN -6, Stainless Braid, Black Fitting
• (2) Black 90 Degree -6 AN Flare to 1/4 Inch NPT Pipe Adapter Fittings
• (2) Speedway Full Flow Swivel Hose End Fitting, Straight, Anodized, -6 AN
• (1) Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Anodized, -6 AN
• (1) Speedway Stainless Steel Braided Hose Line, -6 AN, 6 Ft.

Speedway Motors Ready to Run Pro Billet Distributor

• Perfect for a street performance ignition upgrade
• Features a CNC-machined billet aluminum body and hardened steel shaft, with a sealed ball bearing on top and a sintered steel bushing on the bottom
• Comes with a fully adjustable mechanical advance, vacuum advance, magnetic pickup trigger, and a high-output circuit board module with digital tach output
• The dielectric cap comes with solid brass terminals and a color-matched wire retainer

An important feature on all Speedway Motors Pro Series distributors is the fully adjustable mechanical advance:

• Allows you to easily modify the distributor to achieve a variety of timing curves
• Included with all Pro Series distributors are four bushings of varied size
• The bushing determines the mechanical advance the distributor can achieve
• Also included are six springs, with two at each level of tension
• The springs control the rate at which the distributor reaches the advance

What separates a Ready to Run from a Pro Billet is the top-of-the-line internal ignition module:

• Built using the latest circuit board technology, this module eliminates the need for external ignition control, such as a CDI box
• Also comes with a digital tachometer output
• With a Pro Series Ready to Run distributor, just hook up your ignition coil, and you're good to go

Includes:

• 3 Bushings and 4 Springs for Mechanical Advance
• Color-Matched Spark Plug Wire Retainer with Screws
• Vacuum Advance Block-off Plate (Black)
• Power Extension Cable
• Tachometer Output Extension Cable

PerTronix 40011 Flame-Thrower Coil

• The hotter the spark, the easier your engine will start, and this 40,000 volt coil is just the ticket to a quick start!
• Its higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy
• These coils are internally resisted so they are compatible with many inductive ignition systems
• 40,000 volts
• Black finish for that "stock look"
• For use with 12 volt inductive ignition systems
• 1.5 Ohm primary resistance.
• Legal in all 50 states and Canada

MSD 5554 Street-Fire Spark Plug Wires Set

• Street Fire low resistance spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve
• The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery
• Street Fire spark plug wires have the quality youve come to expect from MSD Ignition at a price thats comparable to other brands
• Features spiral-wound, low-resistance conductors and high EMI suppression capabilities, with 90 degree boots
• Long enough to go over valve covers
• Helically wound conductor suppresses electro and radio noise
• Kevlar core combination for great strength and durability
• Heavy duty terminals for secure connection
• 8mm silicone and synthetic jacket resists heat and abrasion
• 500 ohms per foot resistance for improved spark delivery and power
• Silicone boots protect against high exhaust temps
• These wires are for S/B Chevys with an HEI cap and are designed to be routed over the valve covers

PerTronix 10001 Coil Bracket

• Universal Coil Bracket available Zinc plated
• High quality construction
• Fits all 2.15" diameter Coils
• Limited 90 Day Warranty

Chevy Small Block V8 Mechanical Fuel Pump

• High-performance two-valve mechanical fuel pumps are constructed of heavy-duty materials for consistent performance and reliability
• Their lower body has been designed to rotate to meet your fitment requirements
• Their aluminum housing is given a stylish black finish
• 80 gph
• 6 PSI
• Aluminum construction
• Fits Small Block Chevy applications
• Mounting gasket included
• Main body of pump measures 3-5/8" O.D.
• Mounting face straight out to furthest point 4.083"
• Center of mount bolts to bottom of pump 3.314"
• Overall dia. 3.604"

Fuel Log, 4150 Style Carb, AN -6, Stainless Braid, Black Fitting

• Fully assembled and ready for installation our Dual Inlet Kits are ready to get you going
• Using stainless steel braided hose each kit comes with newly designed adapter fittings made for faster installation
• With these new adapters the wrench goes on once and you turn until the adapter is locked in
• Each kit comes with a 1/8" port for optional gauge installation, gauges sold separately
• Includes Crush Washers
• -6 AN Fittings
• Fits Holley Dual Feed 4150 (Except 4010)
• Black Anodized fittings

Black 90 Degree -6 AN Flare to 1/4 Inch NPT Pipe Adapter Fittings

• Aluminum pipe thread to 37° AN adapter fitting
• Black anodized finish will give your engine compartment the look you are after

Full Flow Swivel Hose End Fittings, Straight, Anodized, -6 AN

• These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings
• Manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look
• These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose
• These fittings come in a straight design and are available in a variety of sizes to fit your specific hose diameter
• Upgrade your fittings to these full flow push-on hose ends and see the difference
• -6 AN female to push-on style adapter
• Straight
• Lightweight aluminum hose ends are completely reusable, and interchangeable
• 37° angled sealing surface guarantees a positive anti-leak seal
• Works great for custom fuel lines
• Available in a Black corrosion resistant finish

Full Flow Swivel Hose End Fittings, 90 Degree, Anodized, -6 AN

• These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings
• Manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look
• These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose
• -6 AN female to push-on style adapter
• 90 degree angle
• Lightweight aluminum hose ends are completely reusable, and interchangeable
• 37° angled sealing surface guarantees a positive anti-leak seal
• Accepts a variety of lightweight aluminum AN style adapters & fittings
• Works great with custom fuel lines
• Available in a Black corrosion resistant finish

Stainless Steel Braided Hose Line, -6 AN, 6 Ft.

• This stainless steel braided hose can be used for low pressure applications like fuel, water, air or oil
• Works great as a fuel line for non ethanol blended gas

NOTE: This hose is >>NOT<< compatible with ETHANOL blended GAS including E85 ! ! !

NOTE: Not to be used for brake or power steering applications. Maximum operating pressure is 750 psi.

Installation Instructions (PDF)

Advancement Distributor Chart (JPEG)

Fitting Thread Application Chart (GIF)

Full Swivel Application Chart (GIF)