S-10 5 Inch Front/ 5 Inch Rear Drop Lowering Kit with Shocks

These are lowering kits that will lower your 82-04 two-wheel drive S-10 chassis just a little bit or put it in the weeds. Inches of drop are approximate and vary with car and engine weight. 

Western Chassis 825520 1982-2004 S-10 Front Coil Springs, 3 Inch Drop

• Rate optimized for the V6 Regular Cab chassis
• Designed for performance and ride quality
• High Quality made to OEM specifications
• Heavy-Duty Powder Coat Finish

Note: If using with the lighter 4 cyl. chassis, springs will only have a 2" drop.

Item Details

Free height is 12.5"
680 lb rate

Works with:

• 1982-2004 2wd S10/S15
• 1983-1988 2wd S10/S15 Blazer

Western Chassis 821013 1982-2004 S10 Dropped Rear Leaf Springs, 4 Inch

• 3 leaf assembly 
• Designed for a smooth ride
• 3” lowering height
• Complete with OEM style “Silent Block” bushings
• Quick and easy install

Item Details

Works with:

• 1982-2004 2wd S10/S15 pickups
• 1983-1994 2wd S10/S15 Blazers

Speedway 1982-04 Chevy S10 Pickup Truck 2 Inch Drop Spindles

More and more people are turning to the Chevy S-10 pickup chassis as a building block for their hot rod. But it seems in most applications the front sits too high and doesn't quite look right. These 2" drop spindles fit the '82-'95 S-10 pickup two-wheel drive front suspension and accept the original rotors and calipers.

Western Chassis 55830 DS2 S10 Rear Shock, 3-4 Inch Drop / Western Chassis 50817 DS2 S10 Front Shock, 2 Inch Drop

• High performance valving
• Hardened chrome piston rod
• Low friction Teflon seals & guide bushings
• Nitrogen pressurized
• OEM style mount bushings

2 Inch Drop S10 Lowering Blocks

Western Chassis 52118 Rear Frame Notching Kit

• Provides frame clearance for rear axle on lowered cars
• Gain clearance without sacrificing strength (3/16" thick material)
• 6-3/4" side to side and 2-7/8" from bottom to top
• Fits frame rail as wide as 2-1/2"
• Fit and weld into your frame 
• Includes a pair of rubber bump stops