Residual Pressure Valve and Fittings Kit, 10 PSI, Polished

Ever had problems with a spongy pedal or slow, unresponsive brakes? If so, you may need a residual pressure valve installed in your brake line. A residual valve acts like a one-way or check valve to maintain brake system pressure to eliminate the problems of a spongy pedal. This 10 PSI residual valve is installed inline between the master cylinder and drum brake wheel cylinders to keep 10 PSI of residual pressure at the wheel cylinder after the brake pedal is released. This ensures that you will have a high, firm pedal next time you press the brake pedal.

Our residual pressure valve features a polished aluminum finish with a 1/8" NPT port at each end. Use 10 PSI residual valves for drum brake applications only.

Kit Includes:

• (1) Drum Brake Residual Valve, 10 PSI
  • 1/8 Inch NPT Inlet
  • 1/8 Inch NPT Outlet
• (2) 3/8 Inch-24 IF Female to 1/8 Inch NPT Male Adapters
  • Brass
  • Fitting End A: 1/8" NPT Male
  • Fitting End B: 3/8"-24 I.F. Female

Learn more about the proper uses of residual valves by reading our tech article.Brake System Selection.

Brake System Builder's Tip (JPG)