|
#715DB206
$45.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Rear Position, Round Rotor Shape, Steel
| Rotor Diameter | 10 Inch |
| Rotor Style | Drilled |
| Rotor Material Type | Steel |
| Rotor Thickness | 0.19" |
| Bolt Pattern | 4 on 2.7" |
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpecs
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 715DB206 |
| Brand | Speedway Motors |
| Rotor Diameter | 10 Inch |
| Rotor Style | Drilled |
| Rotor Material Type | Steel |
| Rotor Thickness | 0.19" |
| Bolt Pattern | 4 on 2.7" |
| GENERAL | |
| Position | Rear |
| Rotor Shape | Round |
| Rotor Type | Solid |
| Rotor Finish | Zinc Plated |
| Inside Diameter | 2.7" |
| Sold in Quantity | Each |
| Notes | Cross-drilled rotor, four 5/16" holes on a 3-3/8" circle. |
4.8
8 Reviews
Customers appreciate the aesthetic and practical value of our rotors, finding them a great fit and visually appealing addition to their vehicles, particularly for vintage models like the 1923 T bucket. Users are particularly impressed with the carbon steel material quality. Some customers suggested that new pads glide smoothly after countersinking the holes, enhancing the product's usability. Although some raised concerns about pad chipping, they felt the enhanced look was a worthy trade-off. Most customers highlighted their willingness to repurchase and recommend the product for its superior performance and value for money.
4.8
8 reviews
5
6
4
2
3
0
2
0
1
0
Filter by Ratings
I would buy this again when needed
5.0
4 years ago
Sick 23 T Bucket
Guilford CT
Verified
Get product, good price
Would Recommend
Yes I' d buy these rotors again and recommend them to anyone
5.0
6 years ago
Les
Wichita KS
Verified
These are a great fit and look good as well.
Would Recommend
Yes
5.0
7 years ago
Debi
Vancouver WA
Verified
Just great for my 1923 T bucket
Would Recommend
Great product
5.0
9 years ago
Dave
Marion, IA.
Verified
Looks great on my '23 T. Had to countersink holes so new pads would glide smooth.
Would Recommend
great product
5.0
15 years ago
MODRN 53
RIVERSIDE< CA
Verified
perfect fit[...]
Would Recommend
satisfied
4.0
15 years ago
none
Bardstown Kentucky
Verified
Very satisfiy with this product. I am trying to locate some bolts with thin heads so they will not hit my axle when turning, any suggestions.
Would Recommend
carbon steel rotors
5.0
15 years ago
Les McKenzie
Lawton Oklahoma
this is a very good product it looks very nice on my 1923 t bucket there is one thing you will need to do before you install the rotors you will need to get a counter sink and just touch each hole to cut the sharp edge off where they surface grind the rotor it will eat up your pads if you dont it worked wonderful after i cut the holes this is a cool product and worth the money if you dont have them get them and enjoy the cool look
Would Recommend
Very nice for the price!
4.0
15 years ago
Yegster
SoCal
Verified
Drilled rotors are a nice visual touch vs. the flat disc option we had before. I was curious to see how the pads would polish the surface, and within 15 miles they looked really nice. I pulled the rotors back off and then polished the centers. I wasn't sure if they was a coating on there to prevent rust, so I just polished what was there. Installed on the car against the chrome suspension, they look great. I am a bit concerned that one of 1.5" pads start chipping off the edges. This size of pad may be too small to handle the drilled surface. Another set is going on to monitor how they wear. Overall I really like the look. Let's hope the pads will last a couple of thousand miles. That would be an okay trade off for the improvement in looks.
Would Recommend
Showing 8 of 8 reviews
1 Question • 1 Answer
are these zinc plated?
by Spike
• 15 years ago
1 answer
View Answer
1 of 1 questions shown
