Rekudo RK600-02 Front Drop Spindle, 1 Inch, 70-81 Camaro/Firebird

REKUDO spindles are one part of a fully engineered suspension and brake system for the 1970-1981 Chevrolet Camaro And Pontiac Firebird. This suspension system is an auto-cross inspired modern suspension system that retains the original equipment (OE) appearance And strength with taller than stock spindles for improved camber gain And lowers the front of the vehicle by 1". These spindles must be used with REKUDO Control Arms RK100-21 and REKUDO JL8 front brake system (calipers, rotors, hubs, dust shields, and brake hoses) Spindles are forged 4140 chrome-moly steel construction with Black EDP Coating. Spindles sold in pairs.

These spindles must be used with Control Arms RK100-21 (full Set) (upper RK100-21U And lower RK100-21L) for improved camber curve - see Camber Curve Graph. See the Attached Alignment Recommendations for - for Daily Driver, Weekend Warrior, and Track Only vehicle applications.

The 4-wheel disc brake upgrade (Corvette style 4-piston calipers for both front and rear) was offered on the 1968 Camaro as a "Heavy Duty Service" package sold through the parts counter at Chevrolet car dealers. In 1969, the 4-piston disc brakes could be ordered as a Regular Production Option (RPO) JL8 package on production vehicles. These high-end brakes were made available to support racing programs like the Sports Car Club of America® (SCCA), and Trans-Am® road racing series. This unique brake option is very rare and was only sold on about 200 production vehicles.

• Fits 1970-1981 Camaro/Firebird - 1" Spindle Drop and 1" Taller for Improved Camber Curve
• Auto-Cross Inspired Modern Suspension Geometry with Original Equipment (OE) Style, Strength And Appearance
• Improved Camber Curve When Used with Rekudo Control Arms RK100-21 – See Camber Curve Graph
• 1" Drop – for Lower Center of Gravity And Improved Handling
• Tall Spindle Design Allows for Immediate Negative Camber Gain When Entering Corners
• Material: Forged 4140 Chrome Moly – for Strength And Durability
• Black EDP (Electro-Deposit Primer) Coating - for Corrosion Protection
• Spindles Support High-Performance REKUDO JL8 Front Brakes – Use with REKUDO JL8 4-Piston Front Disc Brakes
• Must be Use with Control Arms RK100-21
• REKUDO JL8 Brakes Require 15" Minimum Diameter Wheels