Ready to Run Pro Billet Distributor w/Coil & Wires & Weather Pack

Distributor

Speedway Motors Pro Series Ready to Run Distributor is perfect for a street performance ignition upgrade. It features a CNC-machined billet aluminum body and hardened steel shaft, with a sealed ball bearing on top and a sintered steel bushing on the bottom. It also comes with a fully adjustable mechanical advance, vacuum advance, magnetic pickup trigger, and a high-output circuit board module with digital tach output. The dielectric cap comes with solid brass terminals and a color-matched wire retainer.

An important feature on all Speedway Motors Pro Series distributors is the fully adjustable mechanical advance. This allows you to easily modify the distributor to achieve a variety of timing curves. Included with all Pro Series distributors are four bushings of varied size. The bushing determines the mechanical advance the distributor can achieve. Also included are six springs, with two at each level of tension. The springs control the rate at which the distributor reaches the advance.

What separates a Ready to Run from a Pro Billet is the top-of-the-line internal ignition module. Built using the latest circuit board technology, this module eliminates the need for external ignition control, such as a CDI box. It also comes with a digital tachometer output. With a Pro Series Ready to Run distributor, just hook up your ignition coil, and you're good to go.

Includes:

• 3 Bushings and 4 Springs for Mechanical Advance
• Color-Matched Spark Plug Wire Retainer with Screws
• Vacuum Advance Block-off Plate (Black)
• Power Extension Cable
• Tachometer Output Extension Cable
• Weatherpack Connectors:
  • A real water-tight connection
  • Each set consists of one male and one female component
  • Accepts 14 - 16 gauge wire

 

Ignition Coil

The hotter the spark, the easier your engine will start, and this 40,000 volt coil is just the ticket to a quick start! Its higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy. These coils are internally resisted so they are compatible with many inductive ignition systems.

• 40,000 volts
• Black finish for that "stock look"
• For use with 12 volt inductive ignition systems
• 1.5 Ohm primary resistance.
• Legal in all 50 states and Canada
• Zinc coated coil bracket included

 

Spark Plug Wires

If you have ever tried to put plug wires together yourself, you know how frustrating it can be. These pre-assembled Moroso spiral core wires are fiberglass reinforced with a silicone outer layer. 100% silicon boots and Snap-lock spark plug terminals make installation well....a snap! All Mag-Tune spark plug wires are made with high-temperature EPDM jackets and are ready for install! 

• Fits Small Block Chevy Engines - Under the Headers
• Assembled Set ready for install
• Boot Size: 8.00mm
• Distributor Terminal Ends: HEI
• Spark Plug Boot Ends: (2) 90 Degree

 

 

Installation Instructions (PDF)

Advancement Distributor Chart (JPG)

Pertronix Distributor Cross Reference (PDF)