Pressure Brake Switch and Adapter Tee Fitting Kit

Plumb your brakes with the best from Speedway Motors! We packed together a common brake pressure switch with one of our brass adapter fittings for a simple and clean brake switch plumbing solution for you!

Kit Contains:

• (1) Painless Wiring Pressure Brake Switch
• (1) Speedway Motors 3/8 Inch to 1/8 Inch Brass Adapter Tee

Painless Wiring Pressure Brake Switch

Pressure brake switch has 1/8" male NPT threads. For inline installation of this switch, use one of the corresponding tee fittings. This is a standard normally open switch that closes when actuated, at 60-100 psi.

• 1/8 NPT
• Includes pigtail
• Not approved for use with silicone brake fluid

Speedway Motors 3/8 Inch to 1/8 Inch Female Center Brass Adapter Tee

This brass tee fitting is commonly used in brake line systems. It features a 3/8"-24 inverted flare female (45-degree flare) port at each end with a 1/8" NPT female pipe thread port in the middle. Easy way to plumb a brake light pressure switch into your hard line.

• Outlet Fitting: 1/8" NPT Female
• Inlet Fitting: 3/8"-24 IF Female