|
#580441
$531.99
/pair
On Backorder
This part is Backordered. We currently do not have an estimate when this item will ship.
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Front Position, 37.88" Length Eye to Eye, Natural
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese Dual-Flex front springs by Posies lower your classic Chevy 1/2-ton pickup 3" more than a set of new replacement springs. The unique 2-leaf tapered design offers a better ride and provides a 100% increase in safety over mono-leaf springs.
Includes new U-bolts for easy installation.
Note: If used in conjunction with a dropped front axle, you may encounter bump steer and tie rod issues.
Guides & Documents
| KEY SPECS | |
|---|---|
| MFG. Part # | D441 |
| Brand | Posies Super Slide Springs |
| Position | Front |
| GENERAL | |
| Leaf Spring Eye Type | Reverse/Standard Eye Combo |
| Length Eye to Eye | 37.88" |
| Leaf Spring Width | 1-7/8 Inch |
| Suspension Height Adjustment | 3 Inch Lowered |
| Spring Height (Underside) | 3.25" |
| Number of Leafs | 2 |
| Material Type | Steel |
| Finish | Natural |
| Sold in Quantity | Pair |
| Notes | Lowers the truck 3" versus stock springs. If used with a dropped axle, bump steer and tie rod issues may be a problem. Includes new shorter U-bolts. |
4.9
18 Reviews
The product received positive reviews for its high quality, perfect fit, and practicality in upgrading vehicle suspensions. Several users noticed an improved ride and convenient installation, emphasizing the perfect fitting which led to a lowered and smoother ride. However, one customer reported a minor modification was necessary due to the rear mounting point being slightly too wide. The springs effectively replaced worn-out original parts and proved their reliability with their easy installation and enhanced steering control. Customers noted the product's top-quality and its positive impact on ride height, and expressed satisfaction with the adjustments made to their vehicles.
4.9
18 reviews
5
16
4
2
3
0
2
0
1
0
Filter by Ratings
Excellent service
5.0
6 months ago
Donny
Perth west Australia
Verified
Great speedy service
Would Recommend
Always great products
5.0
a year ago
Scooter
Okauchee Wisconsin
Verified
Product fit very nicely. Only took about 2 hours to pull the old springs and install these.
Would Recommend
Would buy again.
5.0
2 years ago
Dan
St. Louis
Verified
Easy application
Would Recommend
Good Product
4.0
3 years ago
The Carpenter
Geneva, AL
Verified
Installed on my '50 GMC FC100. They fit good and lowered my truck 1/4" vs. my worn out original springs.
Would Recommend
Excellent product. Just as described
5.0
6 years ago
old rusty
Calgary,Canada
Verified
easy install. Fit perfectly
Would Recommend
Great upgrade of front suspension
5.0
6 years ago
Wendell
Metairie, Louisiana
Verified
Replaced mono leaf front springs with the poises and the ride became much smoother with better steering control.
Would Recommend
Front Spring
5.0
6 years ago
Jfirro
Miami, Florida
Verified
The spring lowered the front about 2" and fit perfect
Would Recommend
Rear width too wide
4.0
7 years ago
Joe C
Los Angeles
Verified
The rear mounting point was too wide. It wouldn't fit into the rear mount without some major sanding. I had the shave about 1/16" off with a sander for it to even come close to fitting. The listed three inch drop worked out to be around 1/2" with the saggy original suspension. I'm hoping they will settle a little more and be a little closer to 1" at least.
Would Recommend
GOOD quality product
5.0
7 years ago
Alexcellence
Montreal, Canada
Verified
Quality product and fit great.
Would Recommend
I am satisified with this product
5.0
8 years ago
STEVE
sunbury, ohio
Verified
I now have a better ride and it lowered my truck just about right
Would Recommend
Showing 10 of 18 reviews
16 Questions • 17 Answers
What parts are available for lowering a 1954 3800 pickup (3/4 ton)?
by Wes
• 7 years ago
1 answer
View Answer
Can I get a 4 inch drop for 53 Chevy 3100
by Patty
• 7 years ago
1 answer
View Answer
I'm looking to get about 6" of total drop in the front, what setup would you recommend to accomplish this? (Non IFS) Thank you
by Hottrod
• 7 years ago
1 answer
View Answer
Do you recommend a sway bar setup when using these lowering springs to improve the ride?
by Charlie
• 8 years ago
1 answer
View Answer
I'm adding these frt springs to stock 55 3100 series 2..which shocks would you advice? do i need ones with a shorter stroke?
by DJ9952
• 8 years ago
3 answers
View Answers
Do the springs come with bushings installed? If not, do the stock front and rear bushings need to be pressed in?
by Larry
• 8 years ago
6 answers
View Answers
WHICH OF THE EYES ARE FRONT AND REAR. 1 EYE REVERSE AND THE OTHER IS STANDARD
by Robert
• 9 years ago
1 answer
View Answer
I have a terrible bump steer issue with my stock straight axle and leaf springs on a 59 Chevy 1/2 ton. Will changing to the Posies Super Slide Springs hep eliminate my bump steer issue. I'm looking for an alternative to an IFS.
by Truckster59
• 10 years ago
1 answer
View Answer
I am building a '50 Chevy. Currently we put in your drop I beam, we want to buy some lowering springs as well. What can we do for the tie rods? Do you sell a kit? Thanks!
by Kris
• 10 years ago
1 answer
View Answer
Will the factory shackle and bushing bolts work?
by Mike
• 10 years ago
1 answer
View Answer
10 of 16 questions shown
1947-1952 Chevy Fleetline Truck
1947-1948 Chevy Fleetmaster Truck
1947-1954 Chevy Truck
1947-1954 GMC 100-22
1953-1954 GMC 100-24
1952-1953 GMC 102-22
1947-1954 GMC 150-22
1953-1954 GMC 150-24
1947-1954 GMC Truck
