|
#910815
Piston Ring Compressor
- Aluminum construction
- Blue finish
- 2" high
$24.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Key Specs
| MFG. Part # | Select Bore |
| Overall Height | 2.00" |
| Inside Diameter | 4.03" |
| Outside Diameter | 4.47" |
| Material Type | Aluminum |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyDetails
Details
The tapered inner diameter of this ring compressor tool compresses piston rings to proper bore size, eliminating chance of unseen ring breakage. Made from anodized aluminum. For 4.030" or 4.060" bore.
Charts
Ring Style Chart (GIF)
Guides & Documents
Specifications
Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Bore to see |
| Brand | Speedway Motors |
| Overall Height | 2.00" |
| Inside Diameter | 4.03" |
| Outside Diameter | 4.47" |
| Material Type | Aluminum |
| GENERAL | |
| Sold in Quantity | Each |
Ratings & Reviews
4.8
30 Reviews
Customers highly praise the product for its practicality, usability, and quality material. Many laud it as an essential tool for engine builders as it simplifies piston installation, reducing time and guesswork significantly. While some users encountered machining burrs, they managed to polish them out without damaging the product's effectiveness. The product is highly recommended over competitors for its durability, cost-effectiveness, and ease of use. However, customers suggest engraving the size for ease of identification. Irrespective of a few minor enhancements, customers express a high likelihood of repurchase and recommendation to peers, valuing it as superior in the market.
Ratings & Reviews
4.8
30 Reviews
Customers highly praise the product for its practicality, usability, and quality material. Many laud it as an essential tool for engine builders as it simplifies piston installation, reducing time and guesswork significantly. While some users encountered machining burrs, they managed to polish them out without damaging the product's effectiveness. The product is highly recommended over competitors for its durability, cost-effectiveness, and ease of use. However, customers suggest engraving the size for ease of identification. Irrespective of a few minor enhancements, customers express a high likelihood of repurchase and recommendation to peers, valuing it as superior in the market.
4.8
30 reviews
5
27
4
2
3
0
2
1
1
0
Most Liked Positive Review
4.0
After some polishing on the inside surface, it worked great
It arrived quickly and was about 1/3 the cost of a similar ARP one. I needed one for a 4.055" bore and this one at 4.060" bore fit the bill. One bad thing that I didn't catch right off hand was there were some machining burrs on the inside, which caused the oil rings to hang up and break. I broke 2 oil rings before I actually noticed what was causing it. I polished out the burrs with some super fine sandpaper and then buffed it with some compound. That smoothed out the spots and the pistons went in with very little effort. I wish I had looked it over better before starting but that was my fault. 2 extra sets of rings delayed my job by almost a week and cost me $100. Oh well, live, and learn. I would definitely buy again but would check the bore for smoothness BEFORE starting!
Most Liked Negative Review
2.0
Quality control not good
This compressor had six nicks and one half inch scratch in the lower part of the bore, most of the bottom edge had a rough lip on the inside. All of which would damage the rings while being installed. A little buffing and now its all good but the blue coating looks bad. I would have sent it back if I didn't need build this motor quickly.
Filter by Ratings
I would buy this again if it didn't last so long
5.0
a month ago
George
Maryville,Tn
Verified
My brother-in-law wouldn't use anything else. For loading rings
Would Recommend
Should've bought years ago
5.0
a year ago
JL speed
Lexington Ky
Verified
Great product
Would Recommend
Good value
5.0
a year ago
FabDoc
Tucson, AZ
Verified
Works as well as name brand units for less money
Would Recommend
I would buy another, when needed.
5.0
a year ago
Drags
Columbia MO
Verified
Installed rings effortlessly.
Would Recommend
I would buy this again
5.0
3 years ago
N/A
Moscow, Idaho
Verified
works well fits right
Would Recommend
Good tool, Good price.
5.0
5 years ago
Dr.Distortion
Woodinville WA.
Verified
I first bought the Proform version of this tool. It's I.D was WAY off. I sent it back and got this one. It's the right size.
Would Recommend
After some polishing on the inside surface, it worked great
4.0
5 years ago
Duramax Dan
Morristown, TN
Verified
It arrived quickly and was about 1/3 the cost of a similar ARP one. I needed one for a 4.055" bore and this one at 4.060" bore fit the bill. One bad thing that I didn't catch right off hand was there were some machining burrs on the inside, which caused the oil rings to hang up and break. I broke 2 oil rings before I actually noticed what was causing it. I polished out the burrs with some super fine sandpaper and then buffed it with some compound. That smoothed out the spots and the pistons went in with very little effort. I wish I had looked it over better before starting but that was my fault. 2 extra sets of rings delayed my job by almost a week and cost me $100. Oh well, live, and learn. I would definitely buy again but would check the bore for smoothness BEFORE starting!
Would Recommend
Works great
5.0
6 years ago
Monkey
Nc.
Verified
Nice product
Would Recommend
Must have
5.0
6 years ago
Hot Rod Man
Mesa, AZ
Verified
This is an essential tool for any engine builder. It makes installing pistons so easy with little or no danger of broken rings. Get one!
Would Recommend
A "Must Have " tool...
5.0
7 years ago
Bennieboy
Dacusville SC
Verified
If you are still using the traditional spring steel wrap around band type compressor, do yourself a favor... Buy one of these. This is a great solution to piston installation problems. Simply clock your rings, dip piston in your choice of lubricant, start piston into compressor, start into cylinder, push piston into cylinder, done! Very simple design, great results... Saves so much time and guess work.
Would Recommend
Showing 10 of 30 reviews
Questions & Answers
Questions & Answers
Be the first to ask a question.