Most Liked Negative Review
These will work if you're willing, prepared and skilled enough to make any corrections needed. The passenger side panel was as flawless as anybody could ever ask for.
The driver's side had an issue on the back edge at the top where the curved metal piece is. The metal started to crease when it was bent to shape it, causing the metal piece protrude out (picture bending a soda can in half) and formed a point. With the panel on the door, that protruded part would interfere the weather seal at the rear door jam and not allow the door to close.
To fix, I had to carefully peel back the vinyl material, trim the metal and reshape it with some large pliers. I was able to fold the vinyl back where it needed to be and glued it back with some headliner/carpet adhesive. My work paid off as you would never know what needed to be done...but I shouldn't have needed to make such a repair on a brand new door panel.
Other than that, the perforated locations for door handles, arm rests, window cranks and clips all seemed to be close enough to be correct...not perfect, but close enough. Still probably better than some worn out original panels, but not as good as the more expensive brand available.
