Stainless Oval Exhaust Pipe, Hardway Mandrel Bend

• Mandrel bent to maintain interior dimensions and airflow throughout the pipe path 
• Exhaust sections designed to build custom exhaust systems
• Manufactured from 16ga (.060-inch wall) 304 stainless steel tubing
• 45- and 90-degree horizontal exhaust bends with dual 4.50-inch straight sections
• Oval exhaust tubing provides increased ground clearance
• Can be clamped or welded to existing or new exhaust tubing
• Oval to round adapters, oval inlet/outlet mufflers, and more available for your build

Mandrel Bent Oval Exhaust Bends for Custom Oval Exhaust System Creation

Complete application specific exhaust systems are a great DIY option for increased performance and exhaust sound. But what if you’re building something custom (engine, driveline swaps, short bed conversions, etc.) or your ride is simply of the age that direct fit systems aren’t available? Well then, you’re going to be building your own exhaust system. You probably have manifolds or headers already picked out for fitment reasons like an LS swap, but south of the manifold or header exit is often left up a local exhaust shop and their limited product line. Standard round tubing might get the job done but often ends up reducing ground clearance and causing numerous fitment headaches.

The answer is using oval exhaust tubing! The oval exhaust tubing cross section provides for increased flow while not requiring any more height than most standard exhaust systems. The cross section of the typical oval exhaust pipe means you have additional clearance height wise, perfect for lowered vehicles or vehicles with minimal traditional exhaust routing space. Our 45-degree exhaust elbow and 90-degree exhaust elbow bends provide just the right amount of bend often needed to make a custom exhaust routing to clear drivetrain or chassis components. Manufactured from 16-gauge (.060-inch wall thickness) T304 stainless steel, these bends feature a 4.50-inch straight section on either side of the horizontal bend.

Increased Ground Clearance Without Loss of Exhaust Flow

Available in 2.50-inch and 3.00-inch diameters, you can cut the elbow exhaust pipe as needed, even mate it to a second elbow exhaust pipe for a compound bend to solve your exhaust routing needs. Mate these elbow exhaust pipe sections to our other oval exhaust tubing, including straight sections, vertical bends, pie cuts, and more to complete your custom oval exhaust build. We also carry 3-inch oval inlet/outlet mufflers, and 3-inch oval to 3-inch round header collector/pipe adapters to aid in building the perfect exhaust for your ride.