Product Summary

Universal Fit, IFS Front Suspension Type

  • Our Mustang II spindles are constructed from 1045 heat-treated alloy steel. Retains absolute stock factory geometry and uses all stock rotors, bearings, calipers, etc., making it easy to install.
  • For unmatched ride quality for the street and strip, turn to QA1’s Mustang II Coil-Over Shocks
  • New manual rack modeled from the 1982-88 T-bird design which will work with aftermarket Mustang II crossmembers. Bushings included
  • Outer tie rod and inner extension fits left or right, attaches steering rack to spindles
  • Speedway Mustang II Tubular Control Arms

Comes as a Kit

Key Specs

Front Suspension TypeIFS
Control Arm StyleTubular
Spring TypeCoilover
Spring Rate700 lbs.
Bolt Pattern5 on 4.75"

Need To Know

Quick and Easy Returns

Return Policy

Speedway Motors 9109710 Details

Kit Includes:

  • (2) Speedway Mustang II 2 Inch Drop Dropped Steel Spindles
  • (2) QA1 ME303 Coil-Over Shocks for Mustang II
  • (2) Replacement Springs for Mustang II Coilovers
  • (2) QA1 Pin Cross 0.750" O.D.
  • (1) Mustang II Manual Rack & Pinion
  • (2) Speedway Mustang II Steering Rack & Pinion Mounting Bushing
  • (2) Mustang II Outer Tie Rod End, Manual Version
  • (1) Pinto-Mustang II Spindle Nut & Washer Kit
  • (1) GM Metric Caliper Bracket Set for Mustang II Spindle
  • (2) 1978-Up GM Metric Brake Calipers
  • (1) Speedway Soft Street Brake Pads, GM Metric 1978-Up D154
  • (2) Speedway 1974-80 Ford 11 Inch Front Disc Brake Rotors
  • (1) Bearing-Seal Kit for Two Mustang II Brake Rotors
  • (2) Speedway Mustang II Tubular Lower A-Arms for Coilovers, No Strut Rod
  • (4) Speedway Mustang II Upper Control Arm T-Bolts
  • (1) Mustang II Manual Rack Bolt Kit
  • (1) 9/16 Inch Fine Thread Tie Rod Nuts
  • (1) Speedway Mustang II Coil Spring Rubber Isolator Cushion
  • (1) Mustang II Power Rack Bolt Kit
  • (2) Mustang II Rack Spacer, 3/4 Inch
  • (2) Speedway Mustang II Tubular Upper Control Arms, Stock Width
  • (1) Front Disc Brake Hardware Kit

With our complete Mustang II Independent Front Suspension kit you get brand new tubular steel upper and lower control arms with polyurethane bushings, steel spindles, Rubber Brake Lines, new coilovers, new manual rack & pinion with bushings or remanufactured manual rack & pinion with bushings and an 11" brake kit featuring GM Metric-style calipers.


Speedway Motors 9109710 Specifications

MFG. Part #9109710
BrandSpeedway Motors
Front Suspension TypeIFS
Control Arm StyleTubular
Spring TypeCoilover
Spring Rate700 lbs.
Bolt Pattern5 on 4.75"
Dropped SpindlesYes
Spindles IncludedYes
Brakes IncludedYes
Hardware IncludedYes
Sold in QuantityKit