Menu

Shop

Garage

Cart

Account

Product Summary

305, 350, Wet Sump Sump Style, Rear Sump Location

  • Cost-effective Circle Track oil pan with Moroso quality and performance
  • Trap door baffles for oil control
  • Fits 78-87 Metric chassis and Camaro stubs
  • For 86-Up small block Chevy V8
  • 25% more volume than stock oil pumps

Comes as a Kit

Key Specs

BrandSpeedway Motors
Sump LocationRear

Need To Know

This Product Will Ship Free

Shipping Policies & FAQs

Quick and Easy Returns

Return Policy

Details

Save money and move more oil with these high volume Champ style oil pan/pump combos for 1986-Up SBC engines.

Kit Includes:

  • (1) Moroso 21320 Champ Style Oil Pan
  • (1) High Volume Oil Pump
  • (1) Moroso 24316 Oil Pump Pick Up
  • (1) Oil Pan Gasket Set

 

Moroso 21320 Champ Style Oil Pan

  • Cost-effective Circle Track oil pan with Moroso quality and performance
  • Trap door baffles for oil control
  • Removable louvered windage tray
  • Built–in crankscraper
  • Accepts 3.80" stroke with steel rods
  • 7-1/2" deep, 11" wide sump
  • Accepts most starter and flywheel combinations
  • Will not fit engine blocks with splayed main caps
  • Has a 7 quart capacity (not including oil filter)
  • Fits 78-87 Metric chassis and Camaro stubs
  • Fits small block Chevy

 

High Volume Oil Pump 

  • For 1955-1999 small block Chevy V8
  • 25% more volume than stock oil pumps
  • Ideal for high-mileage, basic rebuilds, and racing engines
  • Recommended for applications with remote filters or coolers
  • Upgraded 1.500" long gear (.300" longer than stock)
  • Preset to 55-65 psi, but includes low-pressure spring included if needed
  • Use with 5/8" pick-up tube

 

Moroso 24316 Oil Pump Pick Up

  • Steel champ style oil pan pick-up
  • For 4-bolt small block Chevy high volume oil pumps
  • Has a 5/8" diameter tube
  • 1.90" centerline of holes

 

Oil Pan Gasket

  • 1986-Up one-piece rear seal
  • One-piece Pan Gasket'
  • Approx 1/8" thick
  • Gray gasket w/ torque limiting washers

 

High Volume Oil Pump (more details)

There are many scenarios where a stock-volume oil pump won't provide the protection your engine needs. Engines with loose clearances (quick rebuilds or high-mileage engines) will need more oil volume to maintain a desired pressure. Engines operating at sustained high RPM (racing) also typically need more oil volume to maintain pressure in all oil galleries. 

These high-volume oil pumps move 25% more oil by utilizing 1.500" long internal gears, which is .300" longer than stock pumps. Another benefit of high volume oil pumps is increased pressure at idle, providing some much needed peace of mind on the street. These pumps come preset to 55-65 PSI of oil pressure, with an additional spring to change that pressure setting if needed.

Charts

Specifications

KEY SPECS
BrandSpeedway Motors
Sump LocationRear
GENERAL
Sump StyleWet Sump
Liquid Measurement7 quarts
Material TypeSteel
Depth7.50"
Rear Main Seal Style1-piece
FinishZinc Plated
Has Dipstick ProvisionYes
Dipstick LocationPassenger Side
Oil Inspection PlugNo
BaffledNo
Crank Scraper IncludedYes
Windage Tray IncludedYes
Dipstick IncludedNo
Stroker ClearancedNo
Maximum Stroke with OE Rod4.125"
Kicked OutNo
Oil Pump IncludedYes
Gaskets IncludedYes
Pickup IncludedYes
NotesNot for blocks with splayed main caps.
Sold in QuantityKit