|
#91662001
Starting from
$75.99
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
| MFG. Part # | Select Finish |
| Overall Length | 2.83" |
| Overall Width | 1.75" |
| Overall Height | 1.27" |
| Centerline of Holes | 1.75" |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyMounts to side of 9-1/2" tall lamps and any flat surface. Conceals wiring. Available in brass or chrome.
Note: This is the bracket only (hardware NOT included).
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Finish to see |
| Brand | Speedway Motors |
| Overall Length | 2.83" |
| Overall Width | 1.75" |
| Overall Height | 1.27" |
| Centerline of Holes | 1.75" |
| Inside Diameter | .73" |
| Material Type | Brass |
| Finish | Select Finish to see |
| GENERAL | |
| Sold in Quantity | Pair |
4
10 Reviews
Customers commend the high-quality craftsmanship of the lantern mounting brackets, noting the heavy iron and superior design. The brackets meet user needs, fitting both tall and regular lights, and models like the T-bucket. They are suitable for creative custom applications like motorcycle hearses. Despite reports of occasional scratches under the chrome plating, the overall feedback points towards durable, quality manufacturing with clean finishes. Mounting instructions and hardware are, however, absent. Overall, customers express contentment and continued brand loyalty.
4
10 reviews
5
5
4
1
3
3
2
1
1
0
Most Liked Positive Review
4.0
Yes will continue to purchase these lights
Have been building custom Motorcycle Hearses for over 15 years (Tombstone Hearse & Trike ) we use them exclusively.
Most Liked Negative Review
3.0
they work, but could be better
These brackets do work well for their intended purpose, and they are very robust and strong. The only problem with them is how the mounting holes are drilled. It would work so much better if they were angled inward instead of being straight. (because it seats against a curved surface) It is just about impossible to adequately tighten the nuts inside of the light housing because of this. If the holes were angled inwards, the nuts and washers would seat against the inside surface of the lamps, but because they are straight, the nut will not seat evenly, only at an angle, which makes it impossible to tighten them all the way. so they work but could have a somewhat better design
Filter by Ratings
they work, but could be better
3.0
a year ago
RD
Tool TX
Verified
These brackets do work well for their intended purpose, and they are very robust and strong. The only problem with them is how the mounting holes are drilled. It would work so much better if they were angled inward instead of being straight. (because it seats against a curved surface) It is just about impossible to adequately tighten the nuts inside of the light housing because of this. If the holes were angled inwards, the nuts and washers would seat against the inside surface of the lamps, but because they are straight, the nut will not seat evenly, only at an angle, which makes it impossible to tighten them all the way. so they work but could have a somewhat better design
Would Recommend
Yes
5.0
a year ago
Jack
Woodstock NY
Verified
Headlight mount it works
Would Recommend
Lantern mounting brackets
3.0
4 years ago
A little blue hot rod
Oregon
Verified
Brackets are very nicely made very heavy pieces of iron drilled and cut high quality. looks very nice with the lantern lights against the blue car
Would Recommend
Bought them for both tall and regular lights
5.0
4 years ago
T man
Wi
Verified
Did the job, have coach lights on the sides and back if the T bucket.
Would Recommend
Light bracket mount
5.0
4 years ago
George
New Hampshire
Verified
Mount on model t
Would Recommend
I would buy from you again
5.0
8 years ago
None
North Pole AK
Verified
Husband was happy
Would Recommend
Yes
5.0
8 years ago
Hot Rod MAYELO'S
Eagle pass tex
Verified
Super
Would Recommend
Yes will continue to purchase these lights
4.0
9 years ago
godfeather
Tombstone , AZ
Verified
Have been building custom Motorcycle Hearses for over 15 years (Tombstone Hearse & Trike ) we use them exclusively.
Would Recommend
paying for brass not quality
2.0
10 years ago
godfeather
Tombstone, AZ
Verified
buy these all the time for the past 11 years but 1 out of 5 have lines in the chrome because of deep scratches in the brass that get chromed over poor quality control
ok
3.0
16 years ago
Big John
Sierra Vista, Arizona
These are well made and the plating is clean. There were no instructions or hardware to mount the lights.
Would Recommend
Showing 10 of 10 reviews
1 Question • 1 Answer
What is the recommended way to attach the cowl light to this bracket and the bracket to the body. Obviously "with bolts", but is there a proven method?
by Creed
• 15 years ago
1 answer
View Answer
1 of 1 questions shown
