|
#91013879
$28.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 2-1/2 Inch Exhaust Tubing Diameter, Raw
| MFG. Part # | 91013879 |
| Brand | Speedway Motors |
| Exhaust Tubing Diameter | 2-1/2 Inch |
| Exhaust Pipe Type | Elbow/Connector |
| Outside Diameter | 2.50" |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyEach pipe is expanded on one end to allow easy installation. 16-gauge mild steel. Natural, anti-rust coated finish. Not Aluminized.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91013879 |
| Brand | Speedway Motors |
| Exhaust Tubing Diameter | 2-1/2 Inch |
| Exhaust Pipe Type | Elbow/Connector |
| Outside Diameter | 2.50" |
| GENERAL | |
| Material Type | Mild Steel |
| Finish | Raw |
| Exhaust Pipe Bend Style(s) | 45° Bend |
| Exhaust Pipe Bend Angle(s) | 45 degree |
| Exhaust Pipe Bend Radius(es) | 3.75" |
| Color | Natural |
| Gauge Thickness | 16-gauge |
| Material Thickness | 0.0625" |
| Mandrel Bent | Yes |
| Overall Length | 15" |
| Sold in Quantity | Each |
| Notes | Expanded length is 1.88" |
4.7
18 Reviews
Customers consistently praised the product for its top-notch quality, practicality, and easy weldability properties, making it a favorite for custom exhaust work. Many found it excellent for their DIY exhaust projects, from modifying a vintage roadster to creating a custom exhaust system for a truck. The standout product features were its superior material quality that's excellent for welding made it very easy to work with. Furthermore, the perfect fit and the exceptional quality of the bends were also noted. Though some found the product slightly expensive, its proven performance and usability far outweighed the cost concern, making it a highly recommended purchase among users. In comparison to alternatives, our product offered superior quality, practicality, and ease of use.
4.7
18 reviews
5
14
4
3
3
1
2
0
1
0
Most Liked Positive Review
5.0
yes
finish exhaust system on1927 lakes modified roadster. Updated replica of car I drove at age of 11 in 1949 at El Mirage. [ note] it was the morning before a monthly event . Caught Hot Rod fever then and have never stopped .
Most Liked Negative Review
3.0
Just a piece of pipe - good pipe
Good for fabricating custom headers. Very expensive but works for my application.
Filter by Ratings
I would buy again
5.0
9 months ago
Matt
Kentucky
Verified
Nice pieces for easy installation
Would Recommend
Good product
5.0
2 years ago
Be done
Kcmo
Verified
Correct size and fit
Would Recommend
yes
5.0
2 years ago
Hot Rod
Cumming Ga.. ex . Southern Calif
Verified
finish exhaust system on1927 lakes modified roadster. Updated replica of car I drove at age of 11 in 1949 at El Mirage. [ note] it was the morning before a monthly event . Caught Hot Rod fever then and have never stopped .
Would Recommend
Great
5.0
2 years ago
NONE
Phoenix, AZ
Verified
WORKED AS DESIGNED
Would Recommend
Yes
4.0
3 years ago
G Pa
Lincoln, NE
Verified
The team at the counter in Lincoln are the reason I keep returning .
Would Recommend
I would buy this again
5.0
3 years ago
Dave
Massachusetts
Verified
Fit well.
Would Recommend
I would highly recommend this product
5.0
3 years ago
Tom
Crystal Lake, Illinois
Verified
Building a custom exhaust and this took out all of the guesswork
Would Recommend
1950 Exhaust
5.0
4 years ago
The colorful carpenter
PVB, FL
Verified
I made a custom exhaust for my 1950 Chevy truck
Would Recommend
Great product & I would buy them again.
5.0
4 years ago
Super poppy
Wylie, Texas
Verified
These exhaust part are for my 65 f100 and worked very well.
Would Recommend
Dual exhaust
4.0
5 years ago
That guy
Connecticut
Verified
I built a custom dual exhaust system using these pipes, easy to work with, clean metal was great for welding together! Only bad thing is these pipes are bare steel that is sure to rust if not painted or coated!
Would Recommend
Showing 10 of 18 reviews
3 Questions • 3 Answers
How long is each leg of the elbow?
by Kevin
• 10 years ago
1 answer
View Answer
Are these pieces expanded, a 2.5" OD on one end and a 2.5" ID on the other?
by JJ
• 10 years ago
1 answer
View Answer
What is the bend radius?
by Ricky
• 11 years ago
1 answer
View Answer
3 of 3 questions shown
