Low Back Vinyl Bucket Seat, Passenger Side, Black, w/Seat Mount

Seat

If you are like us, it's hard to find bucket seats small enough to fit in your car. These bucket seats are 24" tall, 20-1/2" wide and 22.5" deep overall and the back adjusts to your preference. The seat back will also fold forward for easy access to the rear of the vehicle. 

• Sliders included
• TIG-Welded steel tubing
• Injection-molded foam
• Adjustable Incline & Recline
• At front of seat, 7-3/4" from mounting plate to top of cushion
• At rear of seat, 5-1/2" from mounting plate to top of cushion

Seat bottom features female threaded mounting holes with the following dimension that corresponds to the included seat sliders:

• 14-1/2" center to center spacing for side to side bolt pattern 
• 11-9/16" center to center spacing for front to back bolt pattern

Seat Mount

• Easily customizable—cut, drill, or modify to fit a wide range of seat installations
• Designed for the #910-1400 lowback vinyl seat and adaptable for Procar 80 & 90 series seats
• Stands just 2" tall for a clean, unobtrusive mounting solution
• Measures 15-5/8" x 19" to provide stable, reliable seat support
• Sold individually for left-hand and right-hand applications to match your specific setup

Make Those Long Hauls Comfortable

There is nothing like getting out on the open road and taking a trip in your hot rod. Multi-state events where you are behind the wheel for several hours at a time mean your driving position must be one of comfort and control. Having the seat positioned just right, a tilt steering column, and proper pedal placement are all key to enjoying the ride and not arrive at your destination feeling like a pretzel.

Tilt steering columns are an easy upgrade, and we offer everything you would need to make that upgrade to your vehicle. Same goes for our huge selection of gas and brake pedal assemblies. So, when it comes to getting your aftermarket seats just right in your early hot rod, don't sweat it, we have you covered there too with our Universal Seat Mount and Slider Kit.

Universal Seat Mount Works Best With Flat Floors But Can Be Modified to Fit

With a mounting bolt pattern of 14-1/4-inches x 18-inches center-to-center the steel tube frame in our Universal Seat Mount and Slider Kit will fit most any flat floor of an early pre-war car or pickup truck. Order a pair of these and update your classic ’40s or ’50s bench seat ride to a pair of buckets, providing more support and comfort and room to add a center console!

Of course, if your ride’s floor is not totally flat a little cutting and welding will allow our steel tube frame to conform to just about anything. Shorten the legs or lengthen the legs as needed to get just the right seat position you are looking for. On flat floor installations our kit should work as delivered with little to no modifications. However, some customers may feel the seat height is too tall, and in these instances cutting the universal seat mounting frame down to your desired working height will be your best course of action for a comfortable driving position.

We include all hardware to mount the seat sliders and seat mounting flanges to the steel frame and even include 1/2-inch steel spacers for clearance between the seat and sliders so that the slider mechanisms work properly without binding. This provides a 7-inch overall height to the assembly, which is not usually a problem in early hot rods or pickup trucks with a completely flat floor. However, you will need your own seat mounting hardware (often included with the seat) and hardware to mount the steel tube frame to your floor.