LockNLube LNL351 Professional Grease Gun, Lever Grip

The heavy-duty, Professional Series Lever Grease Gun from LockNLube takes performance to a new level. It delivers more grease per stroke, more pressure, and more convenience than any lever gun in the world.

Our design incorporates a pressure return system that eliminates pressure locks by returning back pressure to the grease gun with no mess. The machined zinc head, brushed steel barrel and heavy-duty handle will stand up to years of hard work.

• Unique pressure return system allows for clean and easy disconnect from clogged fittings
• Combo air bleeder valve and Loop And Lock Storage Zerk means clean and easy storage.
• The Original patented LocknLube® Grease Coupler
• Locking tab on follower rod for clean, secure storage and use
• Includes:
  • Patented LockNLube® Grease Coupler
  • Hose swivel
  • 20" hose.

FEATURES + BENEFITS *PRESSURE RETURN SYSTEM

• If a clogged grease fitting creates back pressure in the system, hyperextend the lever arm to engage the pressure return system.
• Grease in the system is returned to the cartridge with no mess.
• Easily disconnect the coupler from the fitting to reduce mess and extend the life of the coupler and grease fitting.
• Eliminate the risks involved with disconnecting hoses under high pressures
• Eliminate wasted grease to save money, reduce waste, mess, and environmental contamination.

LOOP And LOCK

• Combo port serves as an air bleeder and storage Zerk for the coupler when not in use. The active Zerk allows grease to be pumped through the system and back into the cartridge.
• This makes for a clean and easy way to return the lever to it's resting position without wasting grease.

FOLLOWER ROD LOCKING TAB

• A locking tab on the follower just above the T-Pull allows you to store the follower rod in a fully inserted and locked position. This reduces mess and frustration from a follower mechanism that may otherwise slide out or "droop" when stored or used vertically.
• To replace grease cartridge, twist T-Pull and pull gently until the follower rod extends. To lock back in place, push up gently while twisting until the tab aligns with the opening and clicks into the barrel.