LockNLube Fittings Kit, Grease Buster, Quick Connects, 50 Caps

Speedway Motors offers LockNLube grease guns and accessories bundled to get you everything you need to get your project moving. This kit pairs up the LockNLube GB17 Grease Buster Clogged Fitting Removal Tool, LNL210 Quick Connect 8-Piece Greasing Accessory Kit, and the LNL134 bag of 50 Grease Fitting Caps.

LockNLube GB17 Grease Buster Clogged Fitting Removal Tool

Open up clogged grease fittings with the original Grease Buster ®. Simply fill with a solvent and tap the piston with a hammer. The updated design includes a textured grip and two o-rings. Manufactured by LockNLube in the USA.

• Cleans and flushes out old dried grease from fittings, pins, shafts, bushings, and joints.
• Uses penetrating fluid and hydraulic pressure
• Reduces downtime. Much cheaper than new bearings!
• Hose extension and pneumatic piston available
• Not for use with sealed bearings.

THE ORIGINAL GREASE BUSTER® IS THE TOUGHEST TOOL ON THE MARKET TO OPEN CLOGGED GREASE FITTINGS.

The Original Grease Buster® is the most rugged version of his products.

The Grease Buster's piston, included with the product, is hollow and should be filled with a liquid (not aerosol) penetrating oil. Seat the piston in the Grease Buster, attach the coupler to your Zerk fitting, and tap the piston with a hammer. This forces the penetrating oil into the fitting and loosens it for regular greasing.

PROPER USE

The Grease Buster is the answer to a problem that many people have lived with for a long time. Plugged-up grease fittings and bearings are a problem common in machinery. One greases a machine and the grease can dry out before the machine is used again. The tool consists of a heavy-duty adjustable hydraulic coupler, cylinder, and a piston with a knob.

Instructions: Remove the piston. Fill the cylinder by pouring in penetrating oil. Start the piston back into the cylinder. Place the tool onto the grease fitting and by tapping the piston, forcing the solvent into the fitting and or bearing. The key work is TAP. Using a lightweight hammer and small, rapid taps, work the penetrating oil into the fitting. You're trying to dissolve the clog, not blast it out of the way. Repeat if necessary.

LockNLube LNL134 Grease Fitting Caps, 50 Pieces, SAE Or Metric

• 50 caps
• Fits all standard grease fittings (SAE And Metric)
• Integrated collar slides onto the fitting, keeping the cap safely attached
• Yellow color

LockNLube LNL210 Quick Connect Greasing Accessory Kit, 8 Piece

Eight quick-connect adapters allow access to hard-to-reach grease fittings. As seen on TruckU on the Motortrend Channel!

• The rip-stop case can be rolled and secured with an attached velcro strap to keep tools clean and portable
• Grommets allow hanging for easy access to the tools
• All tools include a Zerk fitting in the back for easy connection and release from LockNLube® or a traditional, grease coupler
• Includes:
  • Simple 90° Adapter
  • Push-On 90° Adapter
  • 90° Grease Coupler Adapter
  • Narrow Needle Extension
  • Grease Injector Needle
  • Recessed (Cup) Extension
  • Seal-Off Adapter
  • Flexible Hose Extension

Kit Includes:

(1) LockNLube GB17 Grease Buster Clogged Fitting Removal Tool

(1) LockNLube LNL134 Grease Fitting Caps, 50 Pieces, SAE Or Metric

(1) LockNLube LNL210 Quick Connect Greasing Accessory Kit, 8 Piece