Measure length and width of all surfaces to be coated accounting for all curves and irregular shapes.
Multiply length times width to get your total square footage.
Divide total Ceramic Insulation square footage by 25 to calculate gallons needed.
Round up to the next gallon to account for any square footage calculation errors.

Example:

14 ft times 7 ft equals 98 sq. ft.
Then 98 sq. ft. divided by 25 equals 3.92 gallons
By rounding 3.92 up to 4, you will need four gallons of Ceramic Insulation

Preparing Surfaces:

LizardSkin coatings must be applied to a clean, dry surface that is free from rust and corrosion. For bare steel surfaces, a primer with at least 15% elongation is required. All other types of substrates do not require a primer. LizardSkin can be applied without scuffing to a newly primed metal surface.

If existing primer or paint has been on the substrate for more than 5-7 days, the surface needs to be cleaned and scuffed to allow for good mechanical adhesion. For aluminum, stainless, fiberglass and wood, the surface needs to be cleaned and scuffed prior to the application of LizardSkin. Mask off any areas that you don’t want coated.

Have a Question?

Call one of our U.S.-based customer service professionals.

Tech Support - Opens at NaNpm (UTC)