|
#91633019
$12.49
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, .375" Hole Diameter, 3.5" Overall Length
| MFG. Part # | 91633019 |
| Overall Length | 3.5" |
| Overall Width | 1.769" |
| Material Type | Steel |
| Finish | Zinc Plated |
Need help?
855.313.9176Quick and Easy Returns
Return PolicySteel leaf spring spacer for use with 1-3/4" wide springs. 1/4" thick.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91633019 |
| Brand | Speedway Motors |
| Overall Length | 3.5" |
| Overall Width | 1.769" |
| Material Type | Steel |
| Finish | Zinc Plated |
| GENERAL | |
| Hole Diameter | .375" |
| Sold in Quantity | Each |
| Overall Thickness | .240" |
4.9
28 Reviews
The product, presumably a type of spacer, is highly praised for its fit, quality, and practicality. Customers appreciate its role in enhancing their ride, by raising the vehicle's height for various applications, including switching tyre types or increasing clearance for better visibility. Some found these spacers ideal for adjusting their vehicle's leaf springs. The product is appreciated for its easy installation and perfect fitment. Its superior quality, availability and the fact that it performs exactly as described gives it an edge over competition. As per the users, it definitely solves a problem and makes life easier.
4.9
28 reviews
5
26
4
1
3
1
2
0
1
0
Most Liked Positive Review
5.0
Just what I needed
After searching for a solution to raise the front end of my T Bucket I found these and mounted them under the front tongue and on top of the leaf springs. Just what the doctor ordered !!! Now I have an additional 1 inch clearance which is what I needed for the oil pan drain plug to have more clearance.
Most Liked Negative Review
3.0
Worked well
removed 4 spring in leaf spring
Filter by Ratings
Works great
5.0
4 months ago
The man
Blanchester Ohio
Verified
Fit like it should.
Would Recommend
I would buy this product with no problem.They work excellent
5.0
a year ago
The Old Man
Az
Verified
If you need these definitely by them, they work excellent.
Would Recommend
Spring spacer
5.0
2 years ago
Bubba
Kissimmee
Verified
Easy to use
Would Recommend
yes i would buy again
5.0
2 years ago
KZ
marysville
Verified
simple leaf spring spacer
Would Recommend
Fit just right
5.0
3 years ago
GaryD
Canandaigua NY
Verified
Great product
Would Recommend
Yes buy again
5.0
3 years ago
GaryD
Canandaigua NY
Verified
Fit perfect
Would Recommend
I would buy this again.
5.0
3 years ago
Marko
Sioux City IA.
Verified
Great product.
Would Recommend
If needed I would buy these again.
5.0
3 years ago
The Dutchman
Little Rock AR
Verified
These spacers helped make the ride easier
Would Recommend
Great product.
5.0
3 years ago
George
Manitoba
Verified
Great shim. Perfect for application.
Would Recommend
Exactly what I needed
5.0
4 years ago
Mike
Casa Grande, AZ
Verified
Raised my front end on my full fendered model T just enough to swap from radials to bias ply
Would Recommend
Showing 10 of 28 reviews
5 Questions • 5 Answers
I need to use 3 or 4 of these spacers on my T-Bucket.Can I take out the spring bolt,then get a longer bolt to tighten the spacers to the spring?So they stay centered.Also do you sell longer u-bolts?
by DOGMAN
• 8 years ago
1 answer
View Answer
Suggested method for installing/
by hddave
• 13 years ago
1 answer
View Answer
WILL THIS SPACER FIT ON A CHEVY 1500
by BEEFY
• 15 years ago
1 answer
View Answer
I see that 1/4" is all you have, Can you put two together to make a 1/2" riser, or do you think it would have too much stress on it.
by Scott
• 15 years ago
1 answer
View Answer
Do you have it thicker than 1/4 in.?
by 1935den
• 15 years ago
1 answer
View Answer
5 of 5 questions shown
