Landrum Gold Series Rear Coil Springs, 14 In x 5 In OD

#2095014

Landrum Gold Series Rear Coil Springs, 14 In x 5 In OD

Name: Landrum Gold Series Rear Coil Springs, 14 In x 5 In OD
Brand: Landrum
SKU: 2095014
Rating: 5 (3 reviews)

3 Reviews

Ask a Question

All rear springs are closed and ground on both ends which insures proper contact with the jack plate and spring seat.
Made of the highest grade of Chrome Silicon wire found worldwide.
Cold wound, not hot wound. Each coil-over spring is properly heat treated and stress relieved to insure the sides of spring remain parallel during installation.

Rate:

Select a rate

$89.99

/each

In Stock

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

All rear springs are closed and ground on both ends which insures proper contact with the jack plate and spring seat.
Made of the highest grade of Chrome Silicon wire found worldwide.
Cold wound, not hot wound. Each coil-over spring is properly heat treated and stress relieved to insure the sides of spring remain parallel during installation.
Standardized testing procedures.
Powder-coated, not plated to protect the spring from hydrogen embrittlement, a corrosive break down of the spring's surface which decreases the spring's life.

See more details

Key Specs

MFG. Part #	Select Rate
Spring Rate	Select Rate
Free Height	14"
Outside Diameter	5"
Material Type	Steel

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Details

All rear springs are closed and ground on both ends which insures proper contact with the jack plate and spring seat.
Made of the highest grade of Chrome Silicon wire found worldwide.
Cold wound, not hot wound. Each coil-over spring is properly heat treated and stress relieved to insure the sides of spring remain parallel during installation.
Standardized testing procedures.
Powder-coated, not plated to protect the spring from hydrogen embrittlement, a corrosive break down of the spring's surface which decreases the spring's life.
Each spring is designed with the correct pitch and height ratio to insure consistent rate throughout the entire cycle.
Every Landrum Coil spring comes with a dyno sheet. The dyno sheet shows the dynamic rate and force output for the spring in 0.200" increments. This allows the customer to know exactly what the spring rate is and means when you change a spring, you know exactly what change is being made.
Custom winding is available upon request.
The material and workmanship in these springs are second to none and proudly Made in the USA.

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

Specifications

KEY SPECS
MFG. Part #	Select Rate to see
Brand	Landrum
Position	Rear
Spring Rate	Select Rate to see
Free Height	14"
Outside Diameter	5"
Material Type	Steel
Finish	Matte
Color	Gold
Intended for Street Use	No

GENERAL
Sold in Quantity	Each
Progressive Rate Spring	No
Bushing Included	No

Ratings & Reviews

3 Reviews

Overall Assessment

Customers highlight the product's remarkable quality, ideal for various applications if compatible. Noteworthy is its potential to enhance setups, asserting its practical features and usability. While some users experienced size-related compatibility issues, no negative feedback pertained directly to the product's intrinsic characteristics. Overwhelmingly, consumers validated its quality, indirectly suggesting its superiority over competitors.

Write A Review

3 reviews

Filter by Ratings

Sort Reviews

Only 14" 325lbs spring I could find

5.0

3 months ago

Caleb

Missouri

Verified

Exactly what I needed to replace my 13" spring

Would Recommend

for another application I would recommend these springs

5.0

5 months ago

whip

tennessee

Verified

I could not use these springs. Nothing wrong with them. I was trying to get some lower spring rate front springs for my drag car 61 corvette. The only springs that I can find are 5" diameter coils. 5" are too big. They will not fit my front housing. the stock springs are 4 7/8" . I bought these springs hoping they would work.

Would Recommend

Very good product.

5.0

2 years ago

Old Guy

Verified

It's definitely going to help our setup.

Would Recommend

Showing 3 of 3 reviews

Questions & Answers

Be the first to ask a question.