Landrum Gold Series Front Coil Springs, 9.5 In x 5.5 In OD
Landrum Gold Series Front Coil Springs, 9.5 In x 5.5 In OD
Landrum

|

#2095595

Landrum Gold Series Front Coil Springs, 9.5 In x 5.5 In OD

  • All front springs are closed and ground on one end to provide proper contact with the jack plate, not forged. The opposite end is either open or closed tangential to fit properly into the lower control arm.
  • Made of the highest grade of Chrome Silicon wire found worldwide.
See More

Rate:

Select a rate

Starting from

$89.99

/each

In Stock


Quantity

Need Help? Call to Order

Add to a list

Share

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

  • All front springs are closed and ground on one end to provide proper contact with the jack plate, not forged. The opposite end is either open or closed tangential to fit properly into the lower control arm.
  • Made of the highest grade of Chrome Silicon wire found worldwide.
  • Cold wound, not hot wound. Each coil-over spring is properly heat treated and stress relieved to insure the sides of spring remain parallel during installation.
  • Standardized testing procedures.
  • Powder-coated, not plated to protect the spring from hydrogen embrittlement, a corrosive break down of the spring's surface which decreases the spring's life.
See more details

Key Specs

MFG. Part #Select Rate
PositionFront
Spring RateSelect Rate
Free Height9.5"
Inside Diameter5.5"
See more specs

Need To Know

Need help?

855.313.9176
View the Help Center

Quick and Easy Returns

Return Policy

Details

  • All front springs are closed and ground on one end to provide proper contact with the jack plate, not forged. The opposite end is either open or closed tangential to fit properly into the lower control arm.
  • Made of the highest grade of Chrome Silicon wire found worldwide.
  • Cold wound, not hot wound. Each coil-over spring is properly heat treated and stress relieved to insure the sides of spring remain parallel during installation.
  • Standardized testing procedures.
  • Powder-coated, not plated to protect the spring from hydrogen embrittlement, a corrosive break down of the spring's surface which decreases the spring's life.
  • Each spring is designed with the correct pitch and height ratio to insure consistent rate throughout the entire cycle.
  • Every Landrum Coil spring comes with a dyno sheet. The dyno sheet shows the dynamic rate and force output for the spring in 0.200" increments. This allows the customer to know exactly what the spring rate is and means when you change a spring, you know exactly what change is being made.
  • The material and workmanship in these springs are second to none and proudly Made in the USA.

Specifications

KEY SPECS
MFG. Part #Select Rate to see
BrandLandrum
PositionFront
Spring RateSelect Rate to see
Free Height9.5"
Inside Diameter5.5"
Material TypeSteel
FinishPowder Coated
ColorGold
Intended for Street UseNo
GENERAL
Sold in QuantityEach
NotesFits race car suspension setups. Measure spring size needed for proper fitment.
Progressive Rate SpringNo
Bushing IncludedNo

Ratings & Reviews

5

2 Reviews

Overall Assessment

Customers highly appreciate Landrum springs, commending the product's consistent performance. The product stands out due to its included dyno sheet, providing a true rate. This unique feature distinguishes it positively from competitors, offering users the assurance of quality and practicality.

Write A Review

5

2 reviews

5

2

4

0

3

0

2

0

1

0

Filter by Ratings

Landrum goes the extra step

5.0

a year ago

Chief

South Texas

Verified

We like using Landrum springs and have had good success with them. I like the fact that you get a dyno sheet with every spring.

Would Recommend

Great product

5.0

a year ago

Bill

Lincoln, Nebraska

Verified

Great product, like the fact they have a dyno sheet and a true rate!!

Would Recommend

Showing 2 of 2 reviews

Questions & Answers

Be the first to ask a question.

Customer Impersonation Script