|
#92558941
$504.99
/set
On Backorder
This part is Backordered. We estimate this item will ship on or before January 27th.
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 6.88" Cap Diameter, Polished
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpecs
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 92558941 |
| Brand | Speedway Motors |
| GENERAL | |
| Cap Diameter | 6.88" |
| Finish | Polished |
| Base Diameter | 6.50" |
| Stud Length | 3.00" |
| Thread Length | 1.13" |
| Thread Pitch | 2-1/2"-8 |
| Sold in Quantity | Set |
5
9 Reviews
Customers highly commend the product's excellent fit and impressive workmanship, contributing to an overall robust quality. The hub covers are hailed for their aesthetically pleasing effect on rims, adding a cool, high-end look appreciated by both owners and observers. The product offers easy installation and enhances the car's vintage appeal. Practicality is also demonstrated as they can work with shank type lug nuts and washers. Users recommended the product for its ability to significantly improve the car's appearance, with one even referring to it as a 'wicked addition' to any street rod.
5
9 reviews
5
9
4
0
3
0
2
0
1
0
Filter by Ratings
more then happy to do business with speedway
5.0
7 months ago
old crow 2
vineland nj
Verified
better than I though ,really nice! great quality! am very happy.
Would Recommend
Excellent fit, great price and workmanship
5.0
3 years ago
Hank32
Henderson, Auckland, New Zealand
Verified
An excellent product and once again Speedway Motors made purchasing and organising freight to New Zealand so easy.
Would Recommend
These babies are Sha-weet!
5.0
5 years ago
Wish I was Bob Falfa
Rock Hill, SC
I ordered these to beef up the look of my Rodlite rims. I must say, they look killer. People may think they're a little pricey but you get what you pay for. I have gotten nothing but positive feedback since putting these on my 55 Chevy. I love 'em! Keith P South Carolina
Would Recommend
Knockoff Hub Covers
5.0
5 years ago
Keith Pruett
Rock Hill SC
These things look great on my ride. I am using them with RodLite Weld wheels. They add a certain "Cool Factor" to the old machine. They were easy to install. It only took about an hour to put them on. (I used a lug wrench and torque wrench not an air gun) I've gotten many thumbs up since putting them on the car. The only downside that I noticed was they seem to contact the lug tops on the rear wheels. (Ford lug pattern) they don't seem to fit as flush as they do on the front wheels. It doesn't affect the look and no one will probably ever notice. You may be able to use a open end lug nut to cure this issue. However, I would highly recommend these as a wicked addition to any street rod.
Would Recommend
Nice quality & affordable
5.0
6 years ago
Rod Builder
Az
Verified
Easy install on appropriate wheels, keep in mind these require shank type lug nuts & washers.
Would Recommend
Great looking spinners and hubcaps. A lot better quality!
5.0
7 years ago
Newt
Prescott, AZ
Verified
I would buy them again!
Would Recommend
I would buy these again if need be.
5.0
9 years ago
TJP
Tim
Verified
Spinner knock offs look just like the old style traditional ones; love the look!
Would Recommend
Great looking hot rod spinners
5.0
9 years ago
Cuda
Milan, MI
Verified
Had to round bottom edge of hubs to fit my 15" Rodlite wheels. The Mr Roadster spinners look awesome on my 38 Dodge coupe.
Would Recommend
Cool Old-School Piece! Adds a Perfect "Indy Style" Look!
5.0
10 years ago
FireDomeTim
Lincoln, NE
Verified
Nothing changes the look of a car more than a new set of wheels! I picked up a set of kidney bean wheels and wondered what I was going to do for center caps when I came across these! Wow what a great look! I am running original 40 Ford hubs and drums on my old hot rod, and these fit without any issues. These are a three piece unit - a nut, a lug cover, and a threaded mount base. These require a shank style lug nut, but I can see where someone could attach the threaded portion to the wheel in alternate ways to make them work. Once mounted these caps look vintage and add an "Indy Racer" look to my roadster!
Would Recommend
Showing 9 of 9 reviews
11 Questions • 11 Answers
Want is the thickness of the mounting plate?
by Steve
• 2 years ago
1 answer
View Answer
What type of thread lock is recommended for these? Is there a specific one?
by Keith P.
• 5 years ago
1 answer
View Answer
Is there enough room on the plate to drill a 5 on 5 1/2" bolt pattern? If not, are you planning to offer that bolt pattern in the near future?
by Jg
• 7 years ago
1 answer
View Answer
Will the knock off hub covers work on 4 bolt Mustang Wheels?
by StickerX2
• 7 years ago
1 answer
View Answer
Will these fit properly on the JD Wheels Halibrand Replica (612)?
by Sparky
• 8 years ago
2 answers
View Answers
Are the spinners 2 left and 2 right hand thread or all right hand thread?
by Cuda
• 9 years ago
1 answer
View Answer
Can you buy replacement center caps separately? I have 2 cracked mounting flanges 1 left and 1 right and would like to just buy those parts instead if the whole kit. Who would I contact about pieces instead of the whole kit.
by RDNPNorm
• 12 years ago
1 answer
View Answer
what is the over all with and is there any way need 5 on 43/4 front back is 5on5
by bobby41120
• 12 years ago
1 answer
View Answer
Using Basset Wheels Would like to use the spinners on Basset type wheels, what would I need to do to fit the spinners on this wheels. Doing a custom build and want different look of wheel and want to use the spinners on this build. Thank you, Bill
by 6shooter
• 12 years ago
1 answer
View Answer
Will these knockoffs fit a centerline billit wheel? Ford 4 1/2 pattern
by mike1
• 13 years ago
1 answer
View Answer
10 of 11 questions shown
